View ECL10US05_7874625.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

e32-series fiber units amplifier units omron's fiber sensors continue to support an increasing range of applications. this catalog brings you the latest information on our fiber units. fiber sensors best selection catalog e3x-da-s/-mda series e3x-na series
choose the model that suits the installation space from a wide variety of shapes and sizes (7 shapes, in standard or small sizes). a wide variety of shapes for adapting to different installation locations flexible, pliable fiber that can be handled like wire first, our standard lineup first, our standard lineup these fibers units can be used in a variety of applications, such as detecting the presence of workpieces and positioning. flat model you will certainly appreciate the ease of use that flexible fiber ensures. flexible fiber conventional fiber detect workpieces in tight spaces custom-produced sleeves length can be specified in 1-m units saving energy and work space savings and simple mounting flat models models with sleeves screw-shaped cylindrical flat equipped with sleeve standard models standard models p6 detection with increased reliability special-beam models fiber units for the food-packaging, semiconductor, and fpd industries high resistance to external conditions with fiber environment- resistive models application- corresponding models flat models that allow simple screw mounting and straightforward wiring have been added to the lineup. using these models eliminates the problem of fibers getting caught on surrounding objects. models with sleeves allow detection in tight spaces. we will perform the time-consuming task of fashioning the sleeve, with a length and bends to suit the space (except for ultrafine sleeves). we have developed a broad range of fibers to meet a wide variety of needs. multicore (flexible) fiber is a new type of standard fiber that can be used like wire without worrying about the bending radius. we have also produced fiber that will not break when used in moving parts and fiber that is not degraded by contact with oil. we will produce fiber of the required length (in meter units). for large-scale installations, specifications of up to 20 m can be handled. (specifications of 0.3 m and 0.5 m are also possible.)
first, our standard lineup label-detection models e32-g14 alignment-check models e32-l16 liquid-level detection models e32-d36t heat-resistant models chemical-resistant models small-spot models e32-c42+ e39-f3a area-sensing models e32-t16j limited-reflective models e32-l24l high-power models e32-t17l standard models detection with increased detection with increased reliability reliability a variety of heads incorporating the latest optical technology makes it possible to solve common problems related to detection and to increase reliability. special-beam models special-beam models p10 fiber units for the food-packaging, fiber units for the food-packaging, semiconductor, and fpd industries semiconductor, and fpd industries these models, which were developed for specific applications, offer top-quality detection performance. p16 high resistance to external high resistance to external conditions with fiber conditions with fiber we have developed model variations for adapting to a variety of environmental conditions. these models enable detection in high-temperature environments and vacuums. environment- environment- resistive models resistive models p14 resistant to dust and dirt capable of detecting small workpieces resistant to workpiece vibration use these models to handle unstable detection conditions. label detection liquid-level detection alignment and mapping of glass substrates wafer mapping use these models for specific applications. high-temperature environments environments subject to the splattering of chemicals vacuums use these models to handle applications in special environments. application- application- corresponding models corresponding models
4 selection guide fiber units amplifier units detection conditions environmental conditions standard environments special environments high-temperature environ- ments (up to 400oc) environments subject to scat- tering of chemicals and oil vacuum environments standard detection workpiece presence positioning level differences and marks standard models p.6 environment-resistive models p.14 special- beam long-distance sensing, resistance to dust and dirt small beam, resistance to rattling detection of transparent objects special-beam models p.10 application- corresponding labels liquid level alignment and mapping of glass sub- strates wafer mapping application-corresponding models p.16 type digital manual appearance response time 48 s, 1 ms, or 4 ms (2-output models: 80 s, 1 ms, or 4 ms) 100 s, 1 ms, or 4 ms 200 s (high-speed models: 20 s) light source red, green, blue, or infrared led red or green led function dual display (including digital, bar, percent, and hold display functions) threshold adjustment performed manually or by teaching off-delay, on-delay, one-shot timer (adjustable from 1 ms to 5 s) led bar display (5 levels) 8-turn sensitivity adjuster off delay timer (fixed at 40 ms) advanced-function models are available (2-output/input models). water-resistant models are available. models e3x-da @ -s e3x-da @ tw-s (2-output model) e3x-da @ rm-s (input model) e3x-mda @ e3x-na @ e3x-na @ f (high-speed model) e3x-na @ v (water-resistant model) fiber units amplifier units workpiece p resence positioning level differences marks workpiece p resence positioning level difference high power small spot area sensing retroreflective sensing labels liquid level alignment mapping 2-channel models we have developed model variations for handling a broad range of applications.
5 contents selection guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p4 overview of features, applications, and variations standard models flexible (new standard) . . . . . . . . . . . . . . . . . . p6 standard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p6 break-resistant . . . . . . . . . . . . . . . . . . . . . . . . . . . p6 fluorine coating . . . . . . . . . . . . . . . . . . . . . . . . . . p7 special-beam models long distance, high power . . . . . . . . . . . . . . p10 ultracompact, ultrafine sleeve . . . . . . . . . . . . . . p10 coaxial, small spot . . . . . . . . . . . . . . . . . . . . . . . p11 fine beam (narrow vision field) . . . . . . . . . . . . p12 area sensing. . . . . . . . . . . . . . . . . . . . . . . . . . . . p12 retroreflective . . . . . . . . . . . . . . . . . . . . . . . . . . . p13 convergent-reflective . . . . . . . . . . . . . . . . . . . . . p13 environment-resistive models heat-resistant . . . . . . . . . . . . . . . . . . . . . . . . . . p14 chemical-resistant. . . . . . . . . . . . . . . . . . . . . . . . p14 vacuum-resistant . . . . . . . . . . . . . . . . . . . . . . . . p15 application-corresponding models label detection . . . . . . . . . . . . . . . . . . . . . . . . . p16 liquid-level detection . . . . . . . . . . . . . . . . . . . . . p16 glass-substrate alignment . . . . . . . . . . . . . . . . . p17 glass-substrate mapping . . . . . . . . . . . . . . . . . . p17 water mapping . . . . . . . . . . . . . . . . . . . . . . . . . . p18 ordering information through-beam fiber units . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p19 fiber units with reflective sensors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p25 application-corresponding fiber units . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p30 ratings/characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p34 dimensions through-beam fiber units . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p36 fiber units with reflective sensors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p42 application-corresponding fiber units . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p47 precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p51
6 features/applications feature: multicore (flexible) fibers a large number of ultrafine cores are all surrounded by cladding. as a result, the fiber is flexible and can be bent without significantly reducing the light intensity. this helps solve problems, such as fiber being broken by get- ting caught on other objects. ratings/characteristics feature: flat models flat models, which allow simple attachment and wiring, have been added to the lineup. choose the model to suit the installation space from 3 sensing directions and 2 sizes, standard and small. ratings/characteristics *depends on the fiber diameter. feature: bundle fibers the fiber units contain a large number of independent fine fibers, ensuring a high degree of flexibility. ratings/characteristics standard models flexible (new standard) r fewer problems light intensity affected by bends in fiber fiber broken by getting caught on sur- rounding objects perform wiring without worrying about the bending radius. choose the model to suit the installation space from a variety of shapes. flexible fiber conventional fiber cladding cores min. sensing object 0.005-mm dia. min. bending radius 1 mm ambient tem- perature range ? 40 c to 70 c (no icing or condensation) fiber material plastic standard equipped with sleeve cylindrical screw-shaped flat choose the model to suit the installation space from a variety of shapes. new flat models allow space savings and simple installation. min. sensing object 0.005-mm dia. min. bending radius 10 or 25 mm* ambient tem- perature range ? 40 c to 70 c (no icing or condensation) fiber material plastic break-resistant b bundle- f iber models can be used f or moving parts. capable of withstanding at least one million re- peated bends (in typical applications). min. sensing object 0.005-mm dia. min. bending radius 4 mm (withstands repeated bending) ambient tem- perature range ? 40 c to 70 c (no icing or condensation) fiber material plastic
7 ?2?eav?p?[v feature: fluorine coating fluororesin is used as the sheath material to prevent fi- ber degradation resulting from oil adhesion. note: the tip of the head is not chemical-resistant. ratings/characteristics this customization/delivery service applies to standard models. it is aimed at reducing industrial wast e and simplifying the installation procedure. fiber length vs. sensing distance through-beam fiber units (fiber length of 2 m corresponds to 100%.) fiber units with reflective sensors (fiber length of 2 m corresponds to 100%.) model number used when changing only the sleeve length model number used when changing the sleeve length and bends standard models fluorine coating u fiber degradation due to oil is prevented using a fluo- roresin coating. free cutting is possible with cutter provided. oil is blocked! (cross section) fluororesin coatin g min. sensing object 0.005-mm dia. min. bending radius 4 mm ambient tem- perature range ? 40 c to 70 c (with no icing or condensation) fiber material plastic fiber customization service (fiber length, sleeve length, and bends) fiber length aplicable models standard models model number used for ordering standard model number + fiber length fiber length: 0.3 m, 0.5 m, or any length from 1 to 20 m (in 1-m units) sleeve length and bends applicable models e32-tc200b/e32-tc200f e32-dc200b/e32-dc200f the e32-dc200b cannot be bent. 100 80 60 40 20 2 0 5 10 15 20 fiber length (m) 100 80 60 40 20 2 0 5 10 15 20 fiber length (m) sensing distance (%) sensing distance (%) l model: e32- *1 c200 *2 -s *3 r l1 l2 r total length total length model numbers incorporating the bending radius, r, and dimensions l1 and l2 *1: insert "t" for through-beam fiber units and "d" for fiber units with reflective sensors. *2: insert the "b" or "f" that appears at the end of the original model number. *3: insert "50" if the total length is 50 mm. the total length must not exceed 120 mm. specifying l1 only r5 r7.5 r10 r12.5 model number l1 (1) 10 15 12.5 17.5 15 20 17.5 22.5 e32- *1 c200 *2 -s *3 a1 e32- *1 c200 *2 -s *3 a2 e32- *1 c200 *2 -s *3 b1 e32- *1 c200 *2 -s *3 b2 e32- *1 c200 *2 -s *3 c1 e32- *1 c200 *2 -s *3 c2 e32- *1 c200 *2 -s *3 d1 e32- *1 c200 *2 -s *3 d2 (units: mm) (units: mm) specifying l2 only r5 r7.5 r10 r12.5 bending radius bending radius l2 (1) 5 10 7.5 17.5 10 20 12.5 22.5 e32- *1 c200 *2 -s *3 a3 e32- *1 c200 *2 -s *3 a4 e32- *1 c200 *2 -s *3 b3 e32- *1 c200 *2 -s *3 b4 e32- *1 c200 *2 -s *3 c3 e32- *1 c200 *2 -s *3 c4 e32- *1 c200 *2 -s *3 d3 e32- *1 c200 *2 -s *3 d4 model number
8 features/applications overview of model variations note 1. the sensing distances apply for use in combination with the e3x-da-s amplifier unit (general-purpose, standard mode). 2. these symbols are defined as follows. : flexible fiber, : bendable fiber, : fluorine-coated fiber. type (see note 2.) flexible (new standard) standard break-resistant fluorine coating shape of head flexible and pliable withstands repeated bending cable protected against oil screw-shaped (top-view) m4 530 760 680 680 e32-t11r e32-tc200 e32-t11 e32-t11u m3 130 220 200 e32-t21r e32-tc200e e32-t21 (with sleeve) m4 (1.2-dia. sleeve) 530 760 e32-tc200br e32-tc200b m3 (0.9-dia. sleeve) 130 220 e32-tc200fr e32-tc200f cylindrical (top-view) 3 dia. 530 760 680 e32-t12r e32-t12 e32-t12b 1.5 dia. 130 220 200 e32-t222r e32-t222 e32-t22b (side-view) 3 dia. 210 460 e32-t14lr e32-t14l 1 dia. 50 130 e32-t24r e32-t24 flat (top-view) 15 8 3 530 760 680 e32-t15xr e32-t15x e32-t15xb 12 7 2 130 220 150 e32-t25xr e32-t25x e32-t25xb (side-view) 15 8 3 210 460 e32-t15yr e32-t15y 12 7 2 50 130 e32-t25yr e32-t25y (flat-view) 15 8 3 210 460 e32-t15zr e32-t15z 12 7 2 50 130 e32-t25zr e32-t25z standard models sensing distance (mm) (see note 1.) model through-beam fiber units r b (cross section) fluororesin coatin g u r b u
9 ?2?eav?p?[v overview of model variations note 1. the sensing distances apply for use in combination with the e3x-da-s amplifier unit (general-purpose, standard mode). 2. these symbols are defined as follows. : flexible fiber, : bendable fiber, : fluorine-coated fiber. type (see note 2.) flexible (new standard) standard break-resistant fluorine coating shape of head flexible and pliable withstands repeated bending cable protected against oil screw-shaped (top-view) m6 170 300 170 170 e32-d11r e32-dc200 e32-d11 e32-d11u m3 30 80 30 e32-d21r e32-dc200e e32-d21 (with sleeve) m6 (2.5-dia. sleeve) 170 300 e32-dc200br e32-dc200b m3 (1.2-dia. sleeve) 30 80 e32-dc200fr e32-dc200f cylindrical (top-view) 3 dia. 170 230 70 e32-d12r e32-d12 e32-d221b 3 dia. (1.5 dia.) 30 80 30 e32-d22r e32-d22 e32-d22b (side-view) 6 dia. 45 110 e32-d14lr e32-d14l 2 dia. 15 30 e32-d24r e32-d24 flat (top-view) 15 10 3 170 300 170 e32-d15xr e32-d15x e32-d15xb 12 7 23 08 05 0 e32-d25x e32-d25x e32-d25xb (side-view) 15 10 3 40 100 e32-d15yr e32-d15y 12 8 282 0 e32-d25yr e32-d25y (flat-view) 15 10 3 40 100 e32-d15zr e32-d15z 12 8 282 0 e32-d25zr e32-d25z standard models fiber units with reflective sensors r b (cross section) fluororesin coatin g u r b u sensing distance (mm) (see note 1) model
10 features/applications overview of model variations overview of model variations *the sensing distances apply fo r use in combination with the e3x-da-s amplifier unit (general-purpose, standard mode). applications ratings/characteristics type features shape, sensing distance (mm)* model number equipped with large lens 20,000 e32-t17l side-view, screw mounting 3,400 e32-t14 m4 screw 1,330 e32-t11l equipped with large lens 700 e32-d16 m6 screw 400 e32-d11l applications ratings/characteristics type features shape, sensing distance (mm)* model number 1-dia. cylinder 130 e32-t223r 0.5-dia. sleeve (0.25-dia. opening) 44 e32-t33-s5 0.22-dia. sleeve (0.1-dia. opening) 5 e32-t334-s5 0.8-dia. sleeve 16 e32-d33 0.5-dia. sleeve 3 e32-d331 special-beam models long distance, high power powerful beam reduces influence of dust and dirt. long sensing distance enables use in large-scale installations. e32-t14 e32-t11l e32-t17l detecting parts inside (trans- lucent) containers detecting workpieces in coating processes ambient tem- perature range ? 40 c to 70 c (no icing or condensation) fiber material plastic through-beam refle- ctive ultracompact, ultrafine sleeve e32-t223r e32-t334-s5 e32-d33 1 dia. 0.5 dia. 0.22 dia. 3 dia. 3 dia. ultracompact head can be installed in tight spaces. ultrafine sleeve ensures reliable detection of small objects, such as electronic components. e32-d33 e32-t33-s5 alignment inspections detection of terminals min. sensing object 0.005-mm dia. ambient tem- perature range ? 40 c to 70 c (no icing or condensation) material plastic through-beam refle- ctive
11 ?2?eav?p?[v overview of model variations *the sensing distances apply fo r use in combination with the e3x-da-s amplifier unit (general-purpose, standard mode). applications ratings/characteristics type features shape, sensing distance (mm)* model number coaxial, m6 screw 300 e32-cc200 coaxial, 3-dia. cylinder 150 e32-d32l small spot 0.1-dia. spot at a distance of 7 mm e32-c41+ e39-f3a-5 small variable spot spot diameter variable in the range 0.1 to 0.6 mm at distances in the range 6 to 15 mm e32-c42+ e39-f3a long distance, small spot 0.5-dia. spot at 17 mm e32-c31+ e39-f3b long distance, parallel light spot diameter of 4 mm max. at distances in the range 0 to 20 mm e32-c31+ e39-f3c special-beam models coaxial, small spot small spot diameter (0.1 mm min. in diameter) enables the reliable detection of small workpieces. use of red light ensures easy visual recognition and simple positioning. e32-c42+ e39-f3a detecting of cds e32-c31+ e39-f3c min. sensing object 0.005-mm dia. ambient tem- perature range ? 40 c to 70 c (no icing or condensation) fiber material plastic coaxial, reflective e32-c41+ e39-f3a-5 7 mm 0.1 mm dia. spot variable from 0.1 to 0.6 dia. e32-c42+ e39-f3a 6 mm 15 mm 17 mm 0.5 mm dia. e32-c31+ e39-f3b e32-c31+ e39-f3c 4 mm dia. 20 mm 11 mm
12 features/applications overview of model variations *the sensing distances apply for use in co mbination with the e3x-da-s amplifier unit (general-purpose, standard mode). overview of model variations *the sensing distances apply for use in co mbination with the e3x-da-s amplifier unit (general-purpose, standard mode). applications ratings/characteristics type features shape, sensing distance (mm)* model number top view 1,900 e32-t22s side view 1,300 e32-t24s applications ratings/characteristics type features shape, sensing distance (mm)* model number sensing width: 11 mm 840 e32-t16pr sensing width: 11 mm flat-view 750 e32-t16jr sensing width: 30 mm 1,300 e32-t16wr beam width: 11 mm 150 e32-d36p1 special-beam models fine beam (narrow vision field) approx. 60 approx. 4 1300 mm fine beam reduces unwanted light in surrounding area. powerful beam allows use in applications requiring a long sensing distance. e32-t24s e32-t22s alignment inspection of orientation flats min. bending radius 10 mm ambient tem- perature range ? 40 c to 70 c (no icing or condensation) fiber material plastic through-beam area sensing 30 mm 11 mm t hese fiber units ensure greater reliability with the de- tection of position inconsistencies in passing workpiec- es and the presence of workpieces with holes. wide sensing bands of 11 and 30 mm (through-beam models) enable the detecti on of large position incon- sistencies. e32-t16wr e32-d36p1 e32-t16wr e32-t16pr detecting passage of candies detecting chips on f ilm ambient tem- perature range ? 40 c to 70 c (no icing or condensation) e32-t16w @ only: ? 25 c to 55 c fiber material plastic through-beam refle- ctive
13 ?2?eav?p?[v overview of model variations *the sensing distances apply for use in combination with the e3x-da-s amplifier unit (general-purpose, standard mode). overview of model variations *the sensing distances apply for use in combination with the e3x-da-s amplifier unit (general-purpose, standard mode). applications ratings/characteristics type features shape, sensing distance (mm)* model number msr function, m6 screw 250 e32-r21 msr function, screw mounting, long distance 1,500 e32-r16 applications ratings/characteristics type features shape, sensing distance (mm)* model number ultracompact, flat-view ideal for checking stocks of glass sub- strates 0 to 4 e32-l24s heat-resistant up to 105 c, top-view 5.4 to 9 (center: 7.2) e32-l25l wide sensing range, flat-view 0 to 15 e32-l16 heat-resistant up to 200 c, flat-view 4 to 10 e32-l86 special-beam models retroreflective the return optical path ensures that more light is interrupted by transparent workpieces than with through-beam models. equipped with msr function to eliminate light reflected directly from the workpiece. e32-r16 e32-r21 detecting translucent medicine ambient temperature range e32-r21: ? 40 c to 70 c e32-r16: ? 25 c to 55 c (with no icing or condensation) fiber material plastic retrore- flective limited-reflective detection range non-detection range limited-reflective models eliminate light reflected from distant objects. small level differences can be reliably detected. the optical-axis direction can be selected according to the installation space. e32-l24l e32-l25l e32-l24l detecting connector pins detecting wafers (glass substrates) min. sensing object 0.005-mm dia. fiber material plastic 200 c models only: glass limited-reflective
14 features/applications overview of model variations *the sensing distances apply for use in combination with the e3x-da-s amplifier unit (general-purpose, standard mode). overview of model variations *the sensing distances apply for use in combination with the e3x-da-s amplifier unit (general-purpose, standard mode). applications ratings/characteristics type ambient tem- perature range features shape, sensing distance (mm)* model number ? 40 c to 150 c m4 screw 760 e32-t51 ? 40 c to 200 c l-shaped, long distance 1,300 e32-t84s-s ? 60 c to 350 c m4 screw 450 e32-t61-s ? 60 c to 350 c m6 screw 90 e32-d61-s ? 40 c to 400 c m6 screw, with sleeve 60 e32-d73-s applications ratings/characteristics type features shape, sensing distance (mm)* model number water-resistant rou nd head 2,000 e32-t11f built-in lens, high power 3,000 e32-t12f heat-resistant up to 200 c 700 e32-t81f-s built-in lens, high power 95 e32-d12f environment-resistive models heat-resistant these fiber units can be used for various applica- tions in temperatures up to 400 c. e32-t84s-s e32-t61-s detecting wafers in high-temperature en- vironments 150 c models 200 c and higher models e32-t81r e32-d81r all other models min. bending radius 35 mm 10 mm 25 mm fiber material plastic (fluororesin coating) glass (fluo- roresin coating) glass (sus spi- ral coating) t hrough-beam refle- ctive chemical-resistant built-in lens and high-pow er beam reduce the influ- ence of dirt and drops of water. round design prevents drops of water sticking to the head (e32-t11f). e32-t14f detecting workpieces in cleaning processes e32-t12f all other models e32-t51f e32-t81f-s ambient tem- perature range ? 40 c to 70 c ? 40 c to 150 c ? 40 c to 200 c fiber material plastic (fluororesin coating) glass (fluororesin coating) through-beam refle- ctive
15 ?2?eav?p?[v overview of model variations *the sensing distances apply for use in combination with the e3x-da-s amplifier unit (general-purpose, standard mode). fiber units on atmospheric-pressure side flanges ratings/characteristics applications (configuration example) ratings/characteristics type features shape, sensing distance (mm)* model number m4 screw, top-view, heat-resistant up to 120 c, long distance 1,000 e32-t51v+ e39-f1v l-shaped, heat-resistant up to 120 c 130 e32-t54v 1m l-shaped, long distance, heat-resis- tant up to 200 c 480 e32-t84sv 1m appearance type model number common e32-t10v 2m appearance type model number 4-channel flange e32-vf4 1-channel flange e32-vf1 number of channels 4 channels 1 channels item model e32-vf4 e32-vf1 leakage rate 1 10 -10 pam 3 /s max. ambient temperature range operating: ? 25 c to 55 c storage: ? 25 c to 55 c material aluminum (a5056) stainless steel (sus304) aluminum (a5056) flange-seal material fluorocarbon ru bber (viton) weight (packed state) approx. 280 g approx. 240 g environment-resistive models vacuum-resistant these models can be used in high-vacuum environ- ments at pressures from 10 -5 to 0.1 pa. the 4-channel multi-flange, which has a maximum leakage rate of 1 10 -10 pam 3 /s, contributes to space savings. fiber unit on vacuum side (set of 2) e32-t51v e32-t54v e32-t84sv flange e32-vf4 (4 ch ) e32-vf1 (1 ch ) lens unit e39-f1v vacuum chamber atmospheric-pressure side fiber units on atmospheric- pressure side (set of 2) e32-t10v amplifier unit e3x-da-s e3x-na vacuum side 120 c models 200 c models atmospheric- pressure side min. bend- ing radius 30 mm 25 mm fiber mate- rial glass (fluorores- in coating) glass (sus spiral coating) plastic through-beam
16 features/application overview of model variations *the sensing distances apply for use in combination with the e3x-da-s amplifier unit (general-purpose, standard mode). overview of model variations *the sensing distances apply for use in combination with the e3x-da-s amplifier unit (general-purpose, standard mode). applications ratings/characteristics type features shape, sensing distance (mm)* model number slot sensor, no adjustment of optical axis required 10 e32-g14 screw mounting, side-view 3,400 e32-t14 operating principle the presence/absence of liquid is detected using the refractive properties of light . more specifically, it utilizes the fact that the difference in refractive index between the air and the tip/tube is la rger than the difference be- tween the liquid and the tip/tube. type features shape, sensing distance (mm)* model number light on when liquid is present (ideal for checking lower limits) applicable tube: transparent tube with a diameter of 3.2, 6.4, or 9.5 mm and a rec- ommended wall thickness of 1 mm e32-a01 light on when liquid is absent (ideal for checking for overflow) applicable tube: transparent tube with a diameter in the range 6 to 13 mm and a recommended wall thickness of 1 mm e32-a02 no restriction on tube diameter, resis- tant to bubbles and drops of water applicable tube: transparent tube (no re- striction on diameter) e32-d36t heat-resistant up to 200 c, shape pre- vents liquid buildup liquid-contact model e32-d82f1 application-corresponding models label detection 10 mm built-in lens and high-power beam enable the reliable detec - tion of labels through a mounting board. these fiber units can be washed with hydrogen peroxide, making them ideal for the food industry. e32-g14 e32-g14 detecting labels ambient tem- perature range ? 40 c to 70 c (no icing or condensation) fiber material plastic degree of protection ip67 through-beam liquid-level detection area sensing is possible with minimal influence from bubbles and drops of water (e32-a01/a02/d36t). for safety when disconnections occur, two models have been developed, a light on model for liquid pres- ence and a light on model for liquid absence (e32-a01/ a02). e32-d36t e32-d82f1 tube-mounting model liquid-contact model air liquid no liquid present liquid present air tube liquid liquid-contact model tube-mounting tube-mounting liquid- c ontact
17 ?2?eav?p?[v overview of model variations *the sensing distances apply for use in combination with the e3x-da-s amplifier unit (general-purpose, standard mode). overview of model variations *the sensing distances apply for use in combination with the e3x-da-s amplifier unit (general-purpose, standard mode). engineering data (e32-a07/a08/l16) type features shape, sensing distance (mm)* model number 0 to 15 mm, wide-range sensing 0 to 15 e32-l16 long-distance sensing 10 to 20 e32-a08 15 to 25 e32-a07e1 e32-a07e2 heat-resistant up to 300 c 5 to 18 e32-l66 engineering data (e32-a09) type features shape, sensing distance (mm)* model number large-diameter lens ensures re- sistance to tilting 15 to 38 (center: 25) e32-a09 heat-resistant up to 150 c e32-a09h heat-resistant up to 300 c 20 to 30 (center: 25) e32-a09h2 application-corresponding models glass-substrate alignment there is little variation of detection position within the detection range ( 0.1 mm max.) the different model variations can handle a variety of sensing distances and te mperature conditions. e32-l16 2.5 0 5 10 15 20 25 3.0 3.5 4.5 5.0 6.0 detection-position characteristic (typical examples) detection p osition, x ( mm ) e32-a07 e32-a08 e32-l16 sensing distance, y (mm) sensing object: raw glass (t = 0.7 mm, rounded edge) y x limited-reflective glass-substrate mapping these models can reliably detect thin glass-substrate end faces (t = 0.5 mm, beveled edge). using a large-diameter lens makes it possible to cope with tilting of the glass substrates. e32-a09 x mm angle characteristics in left and right directions (typical example) rate of change of digital light-intensity value (%) angle, (o) sensing object: raw glass (t = 0.5 mm, beveled/rounded edge) sensing object: raw glass (t = 0.5 mm, rounded edge) ? + 25 mm ?10 ?8 ?6 ?4 ? 20246810 0 100 75 25 50 emission side reception side sensing distance, x (mm) 300 250 200 150 100 50 0 0 10203040506070 digital light-intensity value vs sensing distance (typical examples) digital light-intensity value rounded edge beveled edge limited-reflective
18 features/applications overview of model variations *the sensing distances apply for use in co mbination with the e3x-da-s amplifier unit (general-purpose, standard mode). features engineering data type features shape, sensing distance (mm)* model number opening angle: 1.5 890 e32-a03 with mounting flange e32-a03-1 opening angle: 3 ultraslim 340 e32-a04 with mounting flange e32-a04-1 application-corresponding models wafer mapping wafers are reliable detect ed with an ultrafine beam. the optical axis is adjusted before delivery to allow easy installation. e32-a03 e32-a03-1 direction of rotation vertical rotation optical axis adjusted before delivery so that displacement is typically within 0.1 . 8-inch wafer mapping characteristic (typical examples) rate of change of digital light-intensity value (%) distance moved , x ( mm ) ?10 ?9 ?8 ?7 ?6 ?5 ?4 ?3 ?2 ? 101234 180 140 160 120 100 80 60 40 20 0 wafer piles can also be detected 170 mm fiber fiber 6.35 mm 2-wafer pile silicon wafer (t = 0.75 mm) for 2 wafers for 1 wafer x through-beam long-distance and ? impressive long-distance sensing capacity (up to 7 m) ? msr function for eliminating light not reflected from the reflector ? size-adjustable line and area beams ? parallel light kept at a constant diameter of 2 mm for up to 1 m ? adjustment function for adjusting the optical axis glass detection through a view port responding to the increasing size of installations wafer ejection inspection e3c-lda-series photoelectric sensors with separate digital amplifiers (laser type) high-precision sensing and simple installation
19 ordering information *1. the values for the minimum sensing object are representative values that indicate values obtained in standard mode with the sensing distance and sensitivity set to optimum values. *2. indicates models that allow free cutting. type appearance (mm) *2 sensing distance (mm) standard object (min. sensing object) (mm) *1 min. bend- ing radius (mm) features model number 1 dia. (0.005 dia.) r1 m4 screw e32-t11r 3-dia. cylinder e32-t12r flat shape e32-t15xr m4 screw, with sleeve e32-tc200br e32-tc200b4r 3-dia. cylinder, side-view e32-t14lr flat shape, side-view e32-t15yr flat shape, flat-view e32-t15zr 0.5 dia. (0.005 dia.) m3 screw (small) e32-t21r 2-dia. cylinder (small) e32-t22r 1.5-dia. cylinder (small) e32-t222r flat shape (small) e32-t25xr m3 screw (small), with sleeve e32-tc200fr e32-tc200f4r 1-dia. cylinder (small), side-view e32-t24r flat shape (small), side-view e32-t25yr flat shape (small), flat-view e32-t25zr through-beam fiber units high-resolution mode high-speed mode *when used in combination with the e3x-da-s amplifier unit (general-purpose). standard mode super-high-speed mode) ( standard models flexible (new standard) standard size m4 350 (140) 530 700 r 3 dia. 15 8 3 1.2 dia. m4 min. bending radius of sleeve: 5 ( ): e32-tc200b4 r 90 (40) 3 dia. 130 (50) 210 270 15 8 3 15 8 3 small size m3 130 160 75 (30) 2 dia. 1.5 dia. 12 7 2 m3 0.9 dia. 90 (40) ( ): e32-tc200f4r min. bending radius of sleeve: 5 1 dia. 60 50 25 (10) 12 7 2 12 7 2
20 *1. the values for the minimum sensing object are representative values that indicate values obtained in standard mode with the sensing distance and sensitivity set to optimum values. *2. indicates models that allow free cutting. type appearance (mm) *2 sensing distance (mm) standard object (min. sensing object) (mm) *1 min. bend- ing radius (mm) features model number 1 dia. (0.005 dia.) r25 m4 screw e32-tc200 3-dia. cylinder e32-t12 flat shape e32-t15x m4 screw, with sleeve e32-tc200b e32-tc200b4 3-dia. cylinder, side-view e32-t14l flat shape, side-view e32-t15y flat shape, flat-view e32-t15z m3 screw (small) e32-tc200a 0.5 dia. (0.005 dia.) r10 e32-tc200e 2-dia. cylinder (small) e32-t22 1.5-dia. cylin- der (small) e32-t222 flat shape (small) e32-t25x m3 screw (small), with sleeve e32-tc200f e32-tc200f4 1-dia. cylinder (small), side- view e32-t24 flat shape (small), side- view e32-t25y flat shape (small), flat-view e32-t25z through-beam fiber units high-resolution mode high-speed mode *when used in combination with the e3x-da-s amplifier unit (general-purpose). standard mode super-high-speed mode) ( standard models s tandard standard size m4 760 1,000 500 (200) m4 15 8 3 1.2 dia. m4 min. bending radius of sleeve: 5 ( ): e32-tc200b4 r 90 (40) 3 dia. 300 (120) 460 600 15 8 3 15 8 3 small size m3 680 900 450 (180) m3 125 (50) 220 270 2 dia. 1.5 dia. 12 7 2 m3 0.9 dia. 90 (40) ( ): e32-tc200f4r min. bending radius of sleeve: 5 1 dia. 130 160 75 (30) 12 7 2 12 7 2
21 *1. the values for the minimum sensing object are representative values that indicate values obtained in standard mode with the sensing distance and sensitivity set to optimum values. *2. indicates models that allow free cutting. *3. the optical fiber is 10 m long on each si de, so the sensing distance is 20,000 mm. *4. the optical fiber is 2 m long on each side, so the sensing distance is 4,000 mm. type appearance (mm) *2 sensing distance (mm) standard object (min. sensing object) (mm) *1 min. bending radius (mm) features model number 1 dia (0.005 dia.) r4 m4 screw e32-t11 3-dia. cylinder e32-t12b flat shape e32-t15xb 0.5 dia (0.005 dia.) m3 screw (small) e32-t21 2-dia. cylinder (small) e32-t221b 1.5-dia. cylin- der (small) e32-t22b flat shape (small) e32-t25xb 1 dia. (0.005 dia.) r4 m4 screw, fluorine coating e32-t11u 10 dia. r25 large built-in lens, m14 screw e32-t17l 4 dia. (0.1 dia.) m4 screw e32-tc200+ e39-f1 r1 m4 screw, flexible fiber e32-t11r+ e39-f1 r4 m4 screw, break-resistant e32-t11+ e39-f1 r25 screw mount- ing, side-view e32-t14 1.4 dia. (0.01 dia.) m4 screw e32-t11l 3-dia. cylinder e32-t12l through-beam fiber units standard models break-resistant standard size m4 680 900 450 (180) b 3 dia. 15 8 3 small size m3 110 (45) 200 240 2 dia. 1.5 dia. 12 7 2 180 150 85 (35) coating m4 680 900 450 (180) u special-beam models long-distance, high-power m14 20,000*3 20,000*3 10,000 (4,000) m4 4,000*4 4,000*4 2,600 (1,500) 4,000*4 3,700 2,400 (970) r 4,000*4 3,600 2,300 (930) b 4,000*4 3,400 2,250 (900) m4 1,700 1,330 870 (350) 3 dia.
22 *1. the values for the minimum sensing object are representative values that indicate values obtained in standard mode with the sensing distance and sensitivity set to optimum values. *2. indicates models that allow free cutting. *3. this is the value for which detection is possible within the sensing area, with the sensing distance set to 300 mm. (the sen sing object is stationary.) type appearance (mm) *2 sensing distance (mm) standard object (min. sensing object) (mm)*1 min. bend- ing radius (mm) features model number 3 dia. (0.1 dia.) r25 m4 screw, side-view e32-t11l+ e39-f2 r1 m4 screw, side-view, flexible fiber e32-t11r+ e39-f2 r4 m4 screw, side-view, break-resis- tant e32-t11+ e39-f2 0.9 dia. (0.005 dia.) r10 m3 screw (small) e32-t21l 2-dia. cylinder (small) e32-t22l 0.5 dia. (0.005 dia.) r1 1-dia. cylinder, flexible fiber e32-t223r 0.25 dia. (0.005 dia.) r10 0.5-dia. sleeve; 0.25- dia. opening e32-t33-s5 0.125 dia. (0.005 dia.) 0.25-dia. sleeve, 0.125- dia. opening e32-t333-s5 0.1 dia. (0.005 dia.) 0.22-dia. sleeve, 0.1- dia. opening e32-t334-s5 1.7 dia. (0.1 dia.) r10 3-dia. cylinder e32-t22s 2 dia. (0.1 dia.) 3.5-dia. cylin- der, side-view e32-t24s (0.2 dia.) *3 r1 area width: 11 mm e32-t16pr r10 e32-t16p r1 area width: 11 mm; side- view e32-t16jr r10 e32-t16j through-beam fiber units high-resolution mode high-speed mode *when used in combination with the e3x-da-s amplifier unit (general-purpose). standard mode super-high-speed mode) ( special-beam models long-distance, high-power m 4 500 (180) 910 800 520 400 250 (100) r 430 (160) 660 820 b m3 540 440 250 (100) 2 dia. ultracompact, thin-sleeve 1 dia. 130 160 75 (30) r sleeve cannot be bent. 3 dia. 0.5 dia. 53 44 25 (10) sleeve cannot be bent. 3 dia. 0.25 dia. 12 10 6 (4) sleeve cannot be bent. 3 dia. 0.22 dia. 6 5 3 (2) fine-beam 3 dia. 2,500 1,900 1,250 (500) 3.5 dia. 1,750 1,300 870 (350) area-sensing 11 1,100 840 560 (220) r 1,500 1,100 750 (300) 11 980 750 480 (190) r 1,300 1,000 650 (260)
23 *1. the values for the minimum sensing object are representative values that indicate values obtained in standard mode with the sensing distance and sensitivity set to optimum values. *2. indicates models that allow free cutting. *3. this is the value for which detection is possible within the sensing area, with the sensing distance set to 300 mm. (the sen sing object is stationary.) *4. this is the value for which detection is possible within the sensing area, with the sensing dist ance set to give a digital v alue of 1,000. (the sensing object is sta- tionary.) *5. for continuous operation, use the products within a temperature range of ? 40 c to 130 c. *6. the maximum temperature that can be withstood varies wit h the location. refer to dimensions diagrams for details. *7. the optical fiber is 2 m long on each side, so the sensing distance is 4,000 mm. type appearance (mm) *2 sensing distance (mm) standard object (min. sensing object) (mm)*1 min. bending radius (mm) features model number (0.3 dia.) *3 r1 area width: 30 mm e32-t16wr r10 e32-t16w (0.6 dia.) *4 r25 area width: 10 mm; long dis- tance e32-t16 2 dia. (0.1 dia) multi-point detec- tion (4-head) e32-m21 150 c*5 1.5 dia. (0.1 dia.) r35 heat-resistant up to 150 c e32-t51 heat-resistant up to 150 c; side- view e32-t54 200 c*6 1 dia. (0.005 dia.) r10 heat-resistant up to 200 c e32-t81r-s 3 dia. (0.1 dia.) r25 heat-resistant up to 200 c; side- view e32-t61-s+ e39-f2 4 dia. (0.1 dia.) heat-resistant up to 200 c, long distance e32-t61-s+ e39-f1 1.7 dia. (0.1 dia) heat-resistant up to 200 c; l- shaped; long dis- tance e32-t84s-s 350 c*6 1 dia. (0.005 dia.) heat-resistant up to 350 c e32-t61-s 4 dia. (0.1 dia.) r4 fluororesin cover, round head e32-t11f r40 fluororesin cover, long distance e32-t12f 3 dia. (0.1 dia.) fluororesin cover, side-view e32-t14f 4 dia. (0.1 dia.) fluororesin cover, heat-resistant up to 150 c *5 e32-t51f 1 dia. (0.005 dia.) r10 fluororesin cover, heat-resistant up to 200 c *6 e32-t81f-s through-beam fiber units special-beam models area-sensing 30 1,700 1,300 850 (340) r 2,300 1,800 1,150 (450) 10 3,700 2,800 1,850 (740) m3 750 610 350 (140) environment-resistive models heat-resistant m4 1,000 760 500 (200) 2 dia. 300 230 150 (60) m4 360 280 180 (70) m 4 600 450 300 (120) m4 4,000*7 3,400 2,200 (900) 3 dia. 1,750 1,300 870 (350) m4 600 450 300 (120) chemical-resistant 7.2 dia. 2,500 2,000 1,300 (520) 5 dia. 4,000*7 3,000 2,000 (800) 5 dia. 500 400 250 (100) 5 dia. 1,800 1,400 900 (350) 6 dia. 920 700 460 (190)
24 * the values for the minimum sensing object are representative va lues that indicate values obtained in standard mode with the se nsing distance and sensitivity set to optimum values. flanges fiber units for atmosp heric-pressure side * indicates models that allow free cutting. lens units mounting brackets through-beam fiber units type appearance (mm) sensing distance (mm) standard object (min. sensing ob- ject) (mm) * min. bending radius (mm) features model number 1.2 dia. (0.01 dia.) r30 m4 screw, heat- resistant up to 120 c e32-t51v 1m 4 dia. (0.1 dia.) m4 screw, heat- resistant up to 120 c, long dis- tance e32-t51v 1m+ e39-f1v 1.2 dia. (0.01 dia.) l-shaped, heat- resistant up to 120 c e32-t54v 1m 4 dia. (0.1 dia.) l-shaped, heat- resistant up to 120 c, long dis- tance e32-t54v 1m+ e39-f1v 2 dia. (0.1 dia.) r25 l-shaped, heat- resistant up to 200 c, long dis- tance e32-t84sv 1m high-resolution mode high-speed mode *when used in combination with the e3x-da-s amplifier unit (general-purpose). standard mode super-high-speed mode) ( environment-resistive models vacuum-resistant 260 200 130 (50) 1,350 1,000 680 (260) 130 210 100 (35) 500 660 330 (180) 480 630 320 (130) appearance (mm) type model number 4-channel flange e32-vf4 1-channel flange e32-vf1 appearance (mm) type model number amplifier-flange connection fiber e32-t10v 2m appear- ance (mm) type quan- tity remarks e39-f1v 2 long-distance lens unit can be used for the e32- t51v and the e32-t54v. appear- ance (mm) type quan- tity remarks e39-l54v 2 can be used for the e32- t54v.
25 ordering information *1. the sensing distances are for white paper. *2. the values for the minimum sensing object are representative values that indicate values obtained in standard mode with the sensing distance and sensitivity set to optimum values. *3. indicates models that allow free cutting. type appearance (mm) *3 sensing distance (mm) *1 (min. sensing object) (mm) *2 min. bending radius (mm) features model number (0.005 dia.) r1 m6 screw e32-d11r 3-dia. cylinder e32-d12r flat shape e32-d15xr m6 screw, with sleeve e32-dc200br e32-dc200b4r 6-dia. cylinder, side-view e32-d14lr flat shape, side-view e32-d15yr flat shape, flat-view e32-d15zr m4 screw (small) e32-d211r m3 screw (small) e32-d21r 3-dia. cylinder (small) e32-d22r flat panel (small) e32-d25xr m3 screw (small), with sleeve e32-dc200fr e32-dc200f4r 2-dia. cylinder (small), side-view e32-d24r flat shape (small), side-view e32-d25yr flat shape (small), flat-view e32-d25zr fiber units with reflective sensors high-resolution mode high-speed mode *when used in combination with the e3x-da-s amplifier unit (general-purpose). standard mode super-high-speed mode) ( standard models flexible (new standard) standard size m6 300 170 120 (50) r 3 dia. 15 10 3 2.5 dia. m6 sleeve can- not be bent. 6 dia. 80 45 30 (14) 15 10 3 70 40 26 (12) 15 10 3 small size m4 50 30 20 (8) m3 3 dia. 12 8 3 1.2 dia. m3 min. bending radius of sleeve: 5 2 dia. 26 15 10 (4) 12 8 2 14 8 5 (2) 12 8 2
26 *1. the sensing distances are for white paper. *2. the values for the minimum sensing object are representative values that indicate values obtained in standard mode with the sensing distance and sensitivity set to optimum values. *3. indicates models that allow free cutting. type appearance (mm) *3 sensing distance (mm) *1 (min. sensing object) (mm) *2 min. bending radius (mm) features model number (0.005 dia.) r25 m6 screw e32-dc200 3-dia. cylinder e32-d12 flat shape e32-d15x m6 screw, with sleeve e32-dc200b e32-dc200b4 6-dia. cylinder, side-view e32-d14l flat shape, side-view e32-d15y flat shape, flat-view e32-d15z r10 m4 screw (small) e32-d211 m3 screw (small) e32-dc200e 3-dia. cylinder (small) e32-d22 flat shape (small) e32-d25x m3 screw (small), with sleeve e32-dc200f e32-dc200f4 2-dia. cylinder (small), side-view e32-d24 flat shape (small), side-view e32-d25y flat shape (small), flat-view e32-d25z fiber units with reflective sensors high-resolution mode high-speed mode *when used in combination with the e3x-da-s amplifier unit (general-purpose). standard mode super-high-speed mode) ( standard models s tandard standard size m6 500 300 200 (90) 3 dia. 400 230 160 (70) 15 10 3 500 300 200 (90) 2.5 dia. m6 90 (40) ( ): e32-dc200b4 sleeve cannot be bent. 6 dia. 200 110 80 (36) 15 10 3 100 170 65 (30) 15 10 3 small size m4 130 80 50 (22) m3 3 dia. 12 8 2 1.2 dia. m3 90 (40) ( ): e32-dc200f4 min. bending ra- dius of sleeve: 5 2 dia. 50 30 20 (8) 12 8 2 35 20 12 (6) 12 8 2
27 *1. the sensing distances are for white paper. *2. the values for the minimum sensing object are representative values that indicate values obtained in standard mode with the sensing distance and sensitivity set to optimum values. *3. indicates models that allow free cutting. type appearance (mm) *3 sensing distance (mm) *1 (min. sensing object) (mm) *2 min. bending radius (mm) features model number (0.005 dia.) r4 m6 screw e32-d11 flat shape e32-d15xb m4 screw (small) e32-d21b 3-dia. cylinder (small) e32-d221b m3 screw (small) e32-d21 1.5-dia. cylinder (small) e32-d22b flat shape (small) e32-d25xb (0.005 dia.) r4 m6 screw, fluorine coating e32-d11u --- r4 large built-in lens, screw mounting e32-d16 (0.005 dia.) r25 m6 screw e32-d11l r10 m4 screw e32-d21l 3-dia. cylinder e32-d22l r4 0.8-dia. sleeve e32-d33 0.5-dia. sleeve e32-d331 fiber units with reflective sensors standard models break-resistant standard size m6 300 170 120 (50) b 15 10 3 small size m4 110 70 45 (20) 3 dia. m3 50 30 20 (8) 1.5 dia. 12 8 2 50 85 30 (15) coating m6 300 170 120 (50) u special-beam models long-distance, high-power 17.5 40 to 700 40 to 1,000 40 to 450 (40 to 240) b m6 650 400 260 (110) m4 210 130 80 (35) 3 dia. ultracompact, thin-sleeve sleeve cannot be bent. 3 dia. 0.8 dia. 25 16 10 (4) sleeve cannot be bent. 2 dia. 0.5 dia. 5 3 2 (0.8)
28 *1. the sensing distances are for white paper. *2. the values for the minimum sensing object are representative values that indicate values obtained in standard mode with the sensing distance and sensitivity set to optimum values. *3. indicates models that allow free cutting. type appearance (mm) *3 sensing distance (mm) *1 (min. sensing object) (mm) *2 min. bending radius (mm) features model number (0.005 dia.) r4 m6 screw e32-cc200r r25 e32-cc200 3-dia. cylinder e32-d32l m3 screw (small) e32-c31 2-dia. cylinder (small) e32-d32 6 to 15 mm; spot diameter: 0.1 to 0.6 mm small spot (variable) e32-c42+ e39-f3a spot diameter of 0.5 to 1 mm at distances in the range 6 to 15 mm e32-d32+ e39-f3a spot diameter of 0.1 mm at 7 mm small spot e32-c41+ e39-f3a-5 spot diameter of 0.5 mm at 7 mm e32-c31+ e39-f3a-5 spot diameter of 0.2 mm at 17 mm long distance, small spot e32-c41+ e39-f3b spot diameter of 0.5 mm at 17 mm e32-c31+ e39-f3b spot diameter of 4 mm max. at distanc- es in the range 0 to 20 mm long-distance sensing, parallel light e32-c31+ e39-f3c (0.005 dia.) r4 beam width: 11 mm e32-d36p1 (0.1 dia.) r10 m6 screw e32-r21+ e39-r3 (attached) (0.2 dia.) r25 screw mounting, long distance e32-r16+ e39-r1 (attached) fiber units with reflective sensors high-resolution mode high-speed mode *when used in combination with the e3x-da-s amplifier unit (general-purpose). standard mode super-high-speed mode) ( special-beam models coaxial, small-spot m6 250 150 100 (45) r 500 300 200 (90) 3 dia. 250 150 100 (45) m3 120 75 50 (22) 2 dia. 4-dia. spot area-sensing 250 150 100 (45) b retroreflective e39-r3 reflector m6 10 to 250 10 to 250 10 to 250 (10 to 250) e39-r3 reflecto r 150 to 1,500 150 to 1,500 150 to 1,500 (150 to 1,500)
29 *1. the sensing distances are for white paper. *2. the values for the minimum sensing object are representative values that indicate values obtained in standard mode with the sensing distance and sensitivity set to optimum values. *3. indicates models that allow free cutting. *4. for continuous operation, use the products within a temperature range of ? 40 c to 90 c. *5. for continuous operation, use the products within a temperature range of ? 40 c to 130 c. *6. the maximum temperature that can be withstood varies wit h the location. refer to dimensions diagrams for details. *7. confirm applicable amplifier units before placing an order. (refer to precautions for correct use.) type appearance (mm) *3 sensing distance (mm) *1 (min. sensing object) (mm) *2 min. bending radius (mm) features model number (0.005 dia.) r25 small level dif- ferences, high power, side-view e32-l25 small level dif- ferences, top- view e32-l25a r10 ultracompact, flat-view e32-l24s heat resistant up to 105 c *4, top-view e32-l24l heat resistant up to 105 c *4, top-view e32-l25l r25 heat resistant up to 200 c, flat- view e32-l86 wide-range sensing, flat- view e32-l16 150 c*5 (0.005 dia.) r35 heat resistant up to 150 c e32-d51 200 c*6 r10 heat resistant up to 200 c e32-d81r-s e32-d81r 350 c*6 r25 heat resistant up to 350 c e32-d61-s e32-d61 400 c*6 heat resistant up to 400 c, with sleeve e32-d73-s e32-d73 (0.005 dia.) r40 fluororesin cov- er, long distance e32-d12f fluororesin cov- er, side-view e32-d14f fiber units with reflective sensors high-resolution mode high-speed mode *when used in combination with the e3x-da-s amplifier unit (general-purpose). standard mode super-high-speed mode) ( special-beam models convergent-reflective 3.3 3.3 3.3 (3.3) 0 to 4 0 to 4 0 to 4 (0 to 4) 2 to 6 (center: 4) 2 to 6 (center: 4) 2 to 6 (2 to 6) (center: 4) 5.4 to 9 (center: 7.2) 5.4 to 9 (center: 7.2) 5.4 to 9 (5.4 to 9) (center: 7.2) 4 to 10 4 to 10 4 to 10 (4 to 10) 0 to 15 0 to 15 0 to 12 (0 to 12) environment-resistive models heat-resistan t m6 400 230 160 (72) m6 150 90 60 (27) m6 m4 1.25 dia. min. bending radius of sleeve: 10 100 60 40 (18) chemical-resistant 6 dia. 160 95 65 (30) 7 dia. 70 40 30 (10)
30 ordering information *1. the values for the minimum sensing object are representative values that indicate values obtained in standard mode with the sensing distance and sensitivity set to optimum values. *2. indicates models that allow free cutting. *3. for continuous operation, use the products within a temperature range of ? 40 c to 130 c. *4. the maximum temperature that can be withstood varies with the location. refer to dimensions diagrams for details. *5. these values are based on the assumption that there are no repeated sudden changes in temperature. *6. the characteristics for sensing object incline are different between the attachments with model numbers ending in "e1" and " e2." refer to page 52 for installation precautions. type appearance (mm) *2 sensing distance (mm) standard object (min. sensing object) (mm)*1 min. bend- ing radius (mm) features model number 4 dia. (0.1 dia.) r25 slot sensor (no ad- justment of optical axis required) e32-g14 screw mounting, side-view e32-t14 applicable tube: transparent tube with a diameter in the range 8 to 10 mm and a recommended wall thickness of 1 mm r10 compact e32-l25t applicable tube: transparent tube (no restriction on diameter) r4 no restriction on tube diameter, re- sistant to bubbles and drops of water e32-d36t applicable tube: transparent tube with a diameter of 3.2, 6.4, or 9.5 mm and a recommended wall thickness of 1 mm light on when fluid is present, resistant to bubbles and drops of water e32-a01 applicable tube: transparent tube with a diameter in the range 6 to 13 mm and a recommended wall thickness of 1 mm light on when fluid is not present, resis- tant to bubbles and drops of water e32-a02 liquid-contact models r40 heat resistant up to 200 c, fluororesin cover e32-d82f1 e32-d82f2 soda glass with reflection factor of 7% r25 variation of detec- tion position within the detection range: 0.2 mm e32-l16 e32-a08 e32-a07e1 *6 e32-a07e2 *6 r25 heat resistant up to 300 c *4, *5 e32-l66 edge of soda glass with re- flection factor of 7% (t = 0.5 mm, rounded edge) r25 resistant to tilting e32-a09 r35 heat resistant up to 150 c *3 e32-a09h r25 heat resistant up to 300 c *4, *5 e32-a09h2 application-corresponding fiber units high-resolution mode high-speed mode *when used in combination with the e3x-da-s amplifier unit (general-purpose). standard mode super-high-speed mode) ( application-corresponding models label-detection 10 10 10 (10) 4,500 3,400 2,250 (900) liquid-level detection glass-substrate-alignment 0 to 15 0 to 15 0 to 12 (0 to 12) 10 to 20 10 to 20 10 to 20 ( - ) 15 to 25 15 to 25 10 to 20 ( - ) 5 to 18 5 to 18 5 to 16 ( - ) glass-substrate-mapping 15 to 38 (center: 25) 15 to 38 (center: 25) 15 to 38 (center: 25) ( - ) 20 to 30 (center: 25) 20 to 30 (center: 25) 20 to 30 (center: 25) ( - )
31 *1. the values for the minimum sensing object are representative values that indicate values obtained in standard mode with the sensing distance and sensitivity set to optimum values. *2. indicates models that allow free cutting. type appearance (mm) *2 sensing distance (mm) standard object (min. sensing object) (mm)*1 min. bend- ing radius (mm) features model number 2 dia. (0.1 dia.) r1 opening angle: 1.5 ; optical axis adjusted before delivery e32-a03 r10 opening angle: 1.5 ; with mounting flange; optical axis adjusted before de- livery e32-a03-1 long distance; opening angle: 4 e32-t24s 1.2 dia. (0.1 dia.) ultraslim (t = 2 mm); opening angle: 3 ; optical axis adjusted before delivery e32-a04 ultraslim (t = 2 mm); opening angle: 3 ; with mounting flange; optical axis adjusted before de- livery e32-a04-1 application-corresponding fiber units application-corresponding models wafer-mapping 3 dia. 1,150 890 600 (250) r 3 dia. 3.5 dia. 1,750 1,300 870 (350) 2 dia. 460 340 225 (100) 2 dia.
32 lens units *1. the values for the minimum sensing object are representative values that indicate values obtained in standard mode with the sensing distance and sensitivity set to optimum values. *2. the optical fiber is 2 m long on each side, so the sensing distance is 4,000 mm. type appearance applicable fiber units sensing distance (mm) standard object (min. sensing object) (mm) *1 features model number high- resolution mode standard mode high- speed mode super- high- speed mode e32-t11l 4,000*2 3,200 2,100 840 4 dia. (0.1 dia.) long-distance sensing; open- ing angle: 5 to 40 (heat resis- tant up to 200 c) e39-f1 e32-tc200 4,000*2 4,000*2 2,600 1,500 e32-t11r 4,000*2 3,700 2,400 970 e32-t11 4,000*2 3,600 2,300 930 e32-t11u 4,000*2 3,600 2,300 930 e32-t81r-s 2,650 2,100 1,300 520 e32-t61-s 4,000*2 3,400 2,200 900 e32-t11l 910 800 500 180 3 dia. (0.1 dia.) side-view, space-saving (heat resistant up to 200 c) e39-f2 e32-tc200 840 700 450 160 e32-t11r 520 400 250 100 e32-t11 820 660 430 160 e32-t11u 820 660 430 160 e32-t81r-s 360 280 180 70 e32-t61-s 600 450 300 120 e32-t11l e32-tc200 e32-t11r e32-t11 e32-t11u e32-t81r-s e32-t61-s --- --- long distance reflection (heat resistant up to 200 c) e39-f3 e32-c42 spot diameter variable in the range 0.1 to 0.6 mm at distanc- es in the range 6 to 15 mm small spot (variable) e39-f3a e32-d32 spot diameter variable in the range 0.5 to 1 mm at distances in the range 6 to 15 mm e32-c41 0.1-dia. spot at a distance of 7 mm small spot e39-f3a-5 e32-c31 0.5-dia. spot at a distance of 7 mm e32-c41 0.2-dia. spot at a distance of 17 mm long distance, small spot e39-f3b e32-c31 0.5-dia. spot at a distance of 17 mm e32-c31 e32-c41 spot diameter of 4 mm max. at distances in the range 0 to 20 mm long-distance sensing, paral- lel light e39-f3c accessories *when used in combination with the e3x-da-s amplifier unit (general-purpose). t hrough-beam lens units long-distance lens units side-view units reflection units reflective lens units small-spot lens units
33 protective spiral tube note: before using a protective spiral tube, remove the protective tube that protects the area between the head and the optical fiber provided with some models. other accessories appearance application applicable fiber units tube length model number fiber protection m3-screw models e32-d21 @ e32-dc200e e32-dc200f @ e32-c31 500 mm e39-f32a5 1 m e39-f32a m3-screw models e32-t21 @ (except the e32-t21r.) e32-tc200e e32-tc200f @ 500 mm e39-f32b5 1 m e39-f32b m4-screw models e32-t11 @ e32-tc200 e32-tc200b @ e32-t51 500 mm e39-f32c5 1 m e39-f32c m6-screw models e32-d11 @ e32-dc200 e32-dc200b e32-cc200 @ e32-d51 500 mm e39-f32d5 1 m e39-f32d appearance application name applicable fiber units remarks model number used to cut the fiber. cutter fiber units that allow free cutting provided with applica- ble fiber units. e39-f4 attachments for in- serting thin fibers into amplifier units thin-fiber at- tachments fiber units that allow free cutting and have a 1.0-dia. sheath ? 2 per set ? provided with applica- ble fiber units. e39-f9 used to extend fibers. fiber connec- tors fiber units that allow free cutting and have a 2.2-dia. sheath --- e39-f10 easy-to-use, one- touch relay connec- tors fiber units that allow free cutting e39-f13: used for fi- ber units with a 2.2- dia. sheath. e39-f14: used for fi- ber units with a 1.0- dia. sheath. e39-f15: used for fi- ber units with a sheath diameter be- tween 1.0 and 2.2 mm. e39-f13 e39-f14 e39-f15 used to bends in sleeves. sleeve bend- er e32-tc200b(4) e32-tc200f(4) e32-dc200f(4) --- e39-f11 accessories
34 ratings/characteristics fiber units *1. there must be no icing or condensation within the range specified for the ambient operating temperature. *2. for continuous operation, use the products within a temperature range of ? 40 c to 90 c. *3. the maximum temperature that can be withstood varies wit h the location. refer to dimensions diagrams for details. item type standard models flexible standard break-resistant fluorine-coating e32-t1 @ r e32-d1 @ r e32-t2 @ r e32-d2 @ r ambient operating temperature range *1 ? 40 c to 70 c ambient humidity range *1 35% to 85% fiber material plastic (pvc coating) plastic (polyethylene coating) plastic (pvc coating) plastic (fluororesin coating) degree of protection iec standard: ip67 item type special-beam models long-distance, high-power ultracompact, ultrafine-sleeve coaxial, small-spot fine-beam (narrow vision field) all other models e32-d16 ambient operating temperature range *1 ? 40 c to 70 c ambient humidity range *1 35% to 85% fiber material plastic (polyethylene coating) plastic (pvc coating) plastic (combination of pvc, polyethylene, and polyolefin sheaths) plastic (pvc coating) degree of protection iec standard: ip67 iec st andard: ip40 iec standard: ip67 iec standard: ip50 item type special-beam models area-sensing retroreflective all other models e32-d36p1 e32-t16 e32-t16w(r) e32-r21 e32-r16 ambient operating temperature range *1 ? 40 c to 70 c ? 25 c to 55 c ? 40 c to 70 c ? 25 c to 55 c ambient humidity range *1 35% to 85% fiber material plastic (pvc coating) plastic (polyethylene coating) plastic (pvc coating) plastic (polyethylene coating) degree of protection iec standar d: ip50 (ip67 for e32-t16) iec standard: ip67 iec standard: ip66 item type special-beam models convergent-reflective all other models e32-l25l e32-l24l e32-l86 ambient operating temperature range *1 ? 40 c to 70 c ? 40 c to 105 c *2 ? 40 c to 200 c *3 ambient humidity range *1 35% to 85% fiber material plastic (polyethylene coating) glass (sus spiral coating) degree of protection iec standard: ip50 (ip40 for e32-l24s, e 32-l16, and e32-l86)
35 fiber units *1. there must be no icing or condensation within the range specified for the ambient operating temperature. *2. for continuous operation, use the products within a temperature range of ? 40 c to 90 c. *3. the maximum temperature that can be withstood varies wit h the location. refer to dimensions diagrams for details. *4. for continuous operation, use the products within a temperature range of ? 40 c to 130 c. *5. these values are based on the assumption that t here are no repeated sudden changes in temperature. item type environment-resistive models heat-resistant e32-t5 @ e32-d5 @ e32-t8 @ r-s e32-d8 @ r-s e32-t84s-s e32-t6 @ -s e32-d6 @ -s e32-d73-s ambient operating temperature range *1 ? 40 c to 150 c *4 ? 40 c to 200 c *3 ? 60 c to 350 c *3 ? 40 c to 400 c *3 ambient humidity range *1 35% to 85% fiber material plastic (fluororesin coating) glass (fluororesin coating) glass (sus spiral coating) degree of protection iec standard: ip67 item type environment-resistive models chemical-resistant vacuum-resistant all other models e32-t51f e32-t81f-s all other models 32-t84sv ambient operating temperature range *1 ? 40 c to 70 c ? 40 c to 150 c *4 ? 40 c to 200 c *3 ? 25 c to 120 c ? 25 c to 200 c ambient humidity range *1 35% to 85% fiber material plastic (fluororesin coating) glass (fluororesin coating) glass (fluororesin coating) glass (sus spiral coating) degree of protection iec standard: ip67 --- item type application-corresponding models label-detection liquid-level detection wafer-mapping all other models e32-a01 e32-a02 e32-d82f ambient operating temperature range *1 ? 40 c to 70 c ? 40 c to 200 c *3 ? 40 c to 70 c ambient humidity range *1 35% to 85% fiber material plastic (polyethylene coating) plastic (fluororesin coating) (fluororesin coating) plastic (polyethylene coating) degree of protection iec standard: ip67 iec st andard: ip50 iec standard: ip68 iec standard: ip50 other repeat accuracy: 1 mm max. repeat accuracy: 0.5 mm max. item type application-corresponding models glass-substrate-alignment glass-substrate-mapping all other models e32-l66 e32-a09 e32-a09h e32-a09h2 ambient operating temperature range *1 ? 40 c to 70 c0 c to 300 c *3, *5 ? 40 c to 70 c ? 40 c to 150 c *4 ? 40 c to 300 c *3 ambient humidity range *1 35% to 85% fiber material plastic (polyethylene coating) glass (sus spiral coating) plastic (polyethylene coating) plastic (fluororesin coating) glass (sus spiral coating) degree of protection iec standard: ip40
36 dimensions standard/flexible models indicates models that allow free cutting. through-beam fiber units m2.6 0.45 1 dia. two hexagonal nuts two toothed washers sensing head: m4 0.7* *material: brass/nickel platin g optical fiber: 2.2 dia. 3.2 3 2.4 14 2,000 7 e32-tc200 e32-t11r e32-tc200e two hexagonal nuts two toothed washers sensing head: m3 0.5* optical fiber: 1 dia. 11 2,000 10 25 fiber attachment (e39-f9) 1.8 5.5 2.5 0.5 dia. *material: brass/nickel plating 2,000 9.5 13.5 5.5 1 dia.* 1 1.8 3 dia. two hexagonal nuts two toothed washers sensing head: m3 0.5* 2 *1. e32-t21r: 0.5 dia. *2. material: brass/nickel plating optical fiber: 2.2 dia. e32-tc200a e32-t21r 0.5 dia. 2 dia. sensing head* *material: stainless steel (sus303) 17 22 2,000 12 25 10 fiber attachment (e39-f9) optical fiber: 1 dia. 1.4 dia. heat-shrinkable tube e32-t22 e32-t22r 1 dia. 3 2.4 dia. sensing head: 3 dia.* optical fiber: 2.2 dia. 11 (14) 2,000 *material: brass/nickel p latin g e32-t12 e32-t12r 10 1.5 dia. 25 10 2,000 fiber attachment (e39-f9) sensing head* 0.5 dia. optical fiber: 1 dia. *material: brass/nickel plating e32-t222 e32-t222r optical fiber: two, 2.2 dia. two, 2.2-dia. mounting holes with two, 4.4-dia. countersinks on both sides sensing head* sensing surface 1 dia. 2,000 8 3 2.5 1.5 15 7.5 5 *material: aluminum e32-t15x e32-t15xr note: 1. set of two symmetrical parts. 2. mounting screws (countersunk screw m2 ? 8 4 pcs) included optical fiber: 1 dia. sensing head* fiber attachment (e39-f9) sensing surface: 0.5 two, 2.2-dia. mounting holes with two, 4.4-dia. countersinks on both sides *material: aluminum 4.5 5 12 2 7 2.5 1 2,000 25 e32-t25x e32-t25xr note: 1. set of two symmetrical parts. 2. mounting screws (countersunk screw m2 ? 8 4 pcs) included 1.2 dia. max. stainless- steel tube (sus304) 1 dia. two hexagonal nuts two toothed washers sensing head: m4 0.7 (coarse thread) *2 *1. ( ): e32-tc200b4 *2. material: brass/nickel plating optical fiber: 2.2 dia. 3.2 11 90 (40)*1 2.4 2,000 7 e32-tc200b (b4) e32-tc200br (b4r) 1.8 5.5 2.5 2,000 11 two hexagonal nuts 0.9 dia. max. 0.5 dia. stainless- steel tube (sus304) two toothed washers sensing head: m3 0.5 *2 optical fiber: 1 dia. 90 (40)*1 10 25 fiber attachment (e39-f9) *1. ( ): e32-tc200f4 *2. material: brass/nickel plating e32-tc200(f4) e32-tc200fr(f4r) 35 sensin g surface 30 1.5 1.5 3 dia. 2.8 1 sensing head: 3 dia.* 45 heat-shrinkable tube optical fiber: 2.2 dia. 12 2,000 *material: stainless steel ( sus304 ) e32-t14l e32-t14lr 35 2,000 15 1.5 0.5 1 15 12 25 10 fiber attachment (e39-f9) stainless-steel tube: 1 dia. 45 heat-shrinkable tube optical fiber: 1 dia. *material: stainless steel ( sus304 ) sensing head: 2 dia.* 1.4 dia. e32-t24 e32-t24r through-beam models consist of two parts: an emitter and a receiver. (unit: mm)
37 standard/flexible models break-resistant/coated models through-beam fiber units optical fiber: two, 2.2 dia. sensing head* sensing surface *material: aluminum 8 3 4 2,000 2.5 1.5 7.5 5 15 two, 2.2-dia. mounting holes with two, 4.4-dia. countersinks on both sides e32-t15y e32-t15yr note: 1. set of two symmetrical parts. 2. mounting screws (countersunk screw m2 8 4 pcs) included 2 3 7 2.5 1 2,000 25 5 4.5 12 optical fiber: 1 dia. sensing surface sensing head* fiber attachment (e39-f9) two, 2.2-dia. mounting holes with two, 4.4-dia. countersinks on both sides *material: aluminum e32-t25y e32-t25yr note: 1. set of two symmetrical parts. 2. mounting screws (countersunk screw m2 8 4 pcs) included sensing head* optical fiber: 2.2. dia. sensing surface two, 2.2-dia. mounting holes with two, 4.4-dia. countersinks on both sides *material: aluminum 8 4 3 2,000 2.5 1.5 7.5 5 15 e32-t15z e32-t15zr note: 1. set of two symmetrical parts. 2. mounting screws (countersunk screw m2 8 4 pcs) included optical fiber: 1 dia. sensing head* sensing surface fiber attachment (e39-f9) two, 2.2-dia. mounting holes with two, 4.4-dia. countersinks on both sides *material: aluminum 7 2.5 1 3 2 2,000 25 5 4.5 12 e32-t25z e32-t25zr note: 1. set of two symmetrical parts. 2. mounting screws (countersunk screw m2 8 4 pcs) included 2.4 15 (14) 2,000 optical fiber: 2.2 dia. two hexagonal nuts two toothed washers protective tube 3.3 sixteen, 0.265 dia. sensing head: m4 0.7* m2.6 0.45 7 3.2 *material: brass/nickel plating e32-t11 e32-t11u 5.5 2.5 four, 0.25 dia. sensing head: m3 0.5* two hexagonal nuts two toothed washers protective tube optical fiber: 1 dia. 10 25 fiber attachment (e39-f9) 2,000 11 1.8 15 *material: brass/nickel plating e32-t21 e32-t12b sixteen, 0.265 dia. 3 2.4 dia. sensing head: 3 dia.* optical fiber: 2.2 dia. 11 (14) 2,000 *material: brass/nickel plating e32-t221b four, 0.25 dia. 2 dia. sensing head* *material: stainless steel (sus303) 17 22 2,000 12 25 10 fiber attachment (e39-f9) optical fiber: 1 dia. 1.4 dia. heat-shrinkable tube e32-t22b 10 1.5 dia. 25 10 2,000 fiber attachment (e39-f9) sensing head* four, 0.25 dia. optical fiber: 1 dia. *material: brass/nickel plating optical fiber: 2.2 dia. sensing head* sensing surface: sixteen, 0.265 dia. two, 2.2-dia. mounting holes with two, 4.4-dia. countersinks on both sides *material: aluminum 2,000 8 3 2.5 1.5 15 7.5 5 e32-t15xb note: 1. set of two symmetrical parts. 2. mounting screws (countersunk screw m2 8 4 pcs) included 4.5 5 12 2 7 2.5 1 2,000 25 optical fiber: 1 dia. sensing head* fiber attachment (e39-f9) sensing surface: four, 0.25 dia. two, 2.2-dia. mounting holes with two, 4.4-dia. countersinks on both sides *material: aluminum e32-t25xb note: 1. set of two symmetrical parts. 2. mounting screws (countersunk screw m2 8 4 pcs) included
38 long-distance/high-power models indicates models that allow free cutting. ultracompact/thin-sleeve models through-beam fiber units 5 lens: 10 dia. (pmma) sensing head: m14 1* two hexagonal nuts optical fiber: 2.2. dia. *material: abs 19 23 42 10,000 e32-t17l 10 0.2 9.2 7 8 2.5 10.5 r3.5 optical axis two, 3.2 dia. heat-resistant abs lens (pmma) 4.4 dia. nitrile rubber 8.2 16 11.2 2 , 000 optical fiber: 2.2 dia. 7.68 e32-t14 m2.6 0.45 1.4 dia. two hexagonal nuts two toothed washers sensing head: m4 0.7* *material: brass/nickel p latin g optical fiber: 2.2. dia. 3.2 3 11 (14) 2,000 7 e32-t11l e32-t12l 1.4 dia. 3 2.4 dia. sensing head: 3 dia.* optical fiber: 2.2. dia. 11 (14) 2,000 *material: brass/nickel p latin g e32-t21l 2.5 0.9 dia. 5.5 11 1.8 (1.7) 25 10 2,000 two hexagonal nuts fiber attachment (e39-f9) sensing head: m3 0.5* optical fiber: 1 dia. two toothed washers *material: brass/nickel plating e32-t22l 25 10 fiber attachment (e39-f9) *material: stainless steel (2) 0.9 dia. 1.8 dia. sensing head: 2 dia.* 17 22 2,000 12 optical fiber: 1 dia. heat-shrinkable tube 10 25 (0.5 ) 2,000 sensing head* 0.5 dia. fiber attachment (e39-f9) optical fiber: 1 dia. 1 dia. *material: stainless steel e32-t223r 5 heat-shrinkable tube 0.25 dia. 3 dia. 0.5 dia. 10 10 12 optical fiber: 1 dia. 1,000 20 25 sensing head* *material: stainless steel fiber attachment (e39-f9) e32-t33-s5 heat-shrinkable tube 0.125 dia. optical fiber: 1 dia. sensing head* *material: stainless steel fiber attachment (e39-f9) 1,000 25 10 12 20 105 3 dia. 0.25 dia. e32-t333-s5 note: the fiber attachment is attached with adhesive and cannot be removed. heat-shrinkable tube 0.1 dia. optical fiber: 1 dia. sensing head* *material: stainless steel fiber attachment (e39-f9) 1,000 25 10 12 20 105 3 dia. 0.22 dia. e32-t334-s5 note: the fiber attachment is attached with adhesive and cannot be removed.
39 fine-beam (narrow vision field) models heat-resistant models area-sensing models through-beam fiber units 3 dia. 1.7 dia. 15 sensing head* optical fiber: 2.2 dia. 2,000 *material: brass/nickel platin g e32-t22s 3.2 10 mounting bracket (provided as accessory) optical fiber: 2.2 dia. sensing head* 1.8 20.5 2 dia. 2 sensing surface 2,000 11 3 3.5 dia. 0.4 17.6 3.2 *material: brass/nickel plating e32-t24s sensing surface (3 30) 18 69 two, 3.2-dia. mounting holes with 6-dia. countersinks optical fiber: 2.2 dia. 65 45 2,000 12 23 18.5 optical axis 5 sensing head* *material: abs (sensing surface: pmma) e32-t16w e32-t16wr 28 13 sleeve 23 11 2,000 1.8 sensing head: m3 0.35 *2 two hexagonal nuts two toothed washers silicon tube *1 four, 1-dia. plastic fibers *1. one set of silicon tubes is black and the other set is gray. use this difference to distinguish between the emission and reception sides. *2. material: stainless steel (sus303) e32-m21 e32-t16p e32-t16pr 19 27 14.5 two, 3.2 dia. 6-dia. countersink 10.7 4 2,000 sensing head*1 optical fiber: 2.2 dia. 4 20 sensing surface (2 11) optical axis *1. material: heat-resistant abs (sensing surface: pmma) *2. provided with stickers with slits of width 0.5 and 1 mm (2 of each). e32-t16j e32-t16jr 4 3.3 sensing surface (2 11) receiver emitter sensing surface (2 11) 27 20 lens* sensing head* optical axis 2 14.5 10.7 4 two, 3.2-dia. holes with 6-dia. countersinks 2000 optical fiber: 2.2 dia. 19 *material: abs for the sensing head and pmma for the lens. 27 2,000 6 dia. 25 20 *1. material: heat-resistant abs (sensing surface: pmma) *2. provided with stickers with slits of width 0.5 and 1 mm (2 of each). sensing head*1 optical axis sensing surface (2 10) (pmma) 8.4 optical fiber: 2.2 dia. 15.5 8.85 3 e32-t16 15 2.4 2.85 dia. 1 7 1.5 dia. 17 2,000 optical fiber: 2.2 dia. two hexagonal nuts two toothed washers sensing head: m4 0.7* *material: brass/nickel platin g e32-t51 note: the maximum allowable temperature is 150 c. the maximum al- lowable temperature for continuous operation is 130 c. e32-t54 note: the maximum allowable temperature is 150 c. the maximum allowable temperature for continuous operation is 130 c. 1 1.7 2 dia. 45 2.5 45 sensing surface 25 20 sensing head: 3 dia.* *material: stainless steel (sus303) optical fiber: 2.2 dia. 2,000
40 heat-resistant models indicates models that allow free cutting . chemical-resistant models through-beam fiber units 7 0.7 dia. 20 3 2.4 4 dia. 10 2,000 5 b 25 13 *2 a 4 dia. 2 dia. 3.6 dia. fluororesin tube protective tube two hexagonal nuts two toothed washers sensing head: m4 0.7 *1 m2.6 0.45 *1. material: stainless steel (sus303) sleeve 2.2 dia. (75) note: the maximum allowable temperatures for sec- tions a and b are 200 c and 110 c, respective- ly. the section inserted into the amplifier unit (indicated by *2), however, must stay within the amplifier unit's operating temperature range. e32-t81r-s e32-t84s-s lens (2 dia.) 13 *2 25 b 5 a 12 (14.2) 630 max. 12 3 dia. 2,000 antislip tread sleeve 4 dia. 4 dia. 3 dia. 3.5 dia. sensing head *1 r5 90 flexible tube: 2.9 dia. (stainless steel) *1. material: stainless steel (sus303) 2.2 dia. note: the maximum allowable temperatures for sections a and b are 200 c and 110 c, respectively. the section inserted into the amplifier unit (indicated by *2), however, must stay within the amplifier unit's operating temperature range. e32-t61-s 7 1 dia. 20 3 2.4 4 dia. *3 10 2,000 25 5 b 13 *2 a 4 dia. sleeve flexible tube: 2.8 dia. (stainless steel) hexagonal caulking two hexagonal nuts two toothed washers sensing head: m4 0.7 *1 m2.6 0.45 *1. material: stainless steel (sus303) *3. the diameter is 6 mm if the fiber length exceeds 10 m. 2.2 dia. note: the maximum allowable temperatures for sections a and b are 200 c and 110 c, respectively. the section inse rted into the amplifier unit (in- dicated by *2), however, must stay within the amplifier unit's operating temperature range. 7.2 dia. nut *1 sensing head *1 optical fiber: 2.2 dia. *2 lens: 3 dia. 10 (10.7) (35) 19.8 3 10 2,000 r3.6 *1. material: pfa *2. sheath material: fluororesin e32-t11f e32-t12f 20 2,000 sensing head: 5 dia. fluororesin 4 dia. optical fiber: 2.2 dia. lens: 4 dia. 100 (21) optical axis 2,000 sensing head: 5 dia. fluororesin 4 dia. optical fiber: 2.2 dia. 100 4.5 e32-t14f 100 (20) 2,000 lens: 3.7 dia. optical fiber: 2.2 dia. fluororesin sensing head: 5 dia. e32-t51f 3.7 dia. 30 (0.8) 2,000 13 *2 (70) b 25 5 a 4 dia. sleeve 2.2 dia. protective tube pfa tube 2 dia. pfa cover (r6) 6 dia. e32-t81f-s note: the maximum allowable temperatures for sec- tions a and b are 200 c and 110 c, respective- ly. the section inserted into the amplifier unit (indicated by *2), however, must stay within the amplifier unit's operating temperature range.
41 vacuum-resistant models through-beam fiber units e32-t51v 83 m2.6 0.45 two spring washers 4 dia. optical fiber: 3 dia. 4 dia. connected to flange (vacuum side) 2.2 dia. m4 0.7 * two nuts 20 (30) 1,000 26 1.15 dia. *material: aluminum 18 4.5 3 12 m2.6 0.45 1.15 dia. 3 dia. * 4 4 4 dia. 4 dia. connected to flange (vacuum side) 3 dia. 2.2 dia. 5 dia. r9 (3) (15) 1,000 26 *material: stainless steel (sus304) e32-t54v (14.2) sensing head: 3 dia.* lens (2 dia.) 12 6 r5 3 dia. 3.5 dia. 90 flexible tube (stainless steel): 2.9 dia. 4 dia. 4 dia. 2.2 dia. connected to flange (vacuum side) 30 max. 12 1,000 26 *material: stainless steel ( sus304 ) e32-t84sv 8.9 0.5-dia. hole 6 m2.6 0.45 effective depth: 3.8 spot-facing depth: 0.9 4 dia. e39-f1v 36 dia. 49 70 dia. 44 dia. 45 90 dia. 80 80 four, 10 dia. 24 flange v40 o-ring flange 8 e32-vf4 note 1. perform mounting so that the v40 o-ring is on the atmospheric- pressure side of the vacuum chamber wall. 2. mounting-hole cutout dimensions: 38 dia. 0.5 mm (96) (63) 10 (23) 22 519 6 (33.53) 30 20 dia. 22 one nut m14 2 two, connectors one spring washer v15 o-ring e32-vf1 note 1. perform mounting so that the v15 o-ring is on the atmospheric-pres- sure side of the vacuum chamber wall. 2. mounting-hole cutout dimensions: 14.5 dia. 0.2 mm
42 dimensions standard/flexible models indicates models that allow free cutting . fiber units with reflective sensors 4.8 two, 1 dia. 4 dia. 2.4 3 17 2,000 10 two hexagonal nuts two toothed washers sensing head* m6 0.75 optical fiber: two, 2.2 dia. *material: ad c e32-dc200 e32-d11r 3.2 two, 0.5 dia. two hexagonal nuts two toothed washers sensing head: m4 0.7* optical fiber: two, 1 dia. 2.4 3 15 2,000 7 10 25 two fiber attachments (e39-f9) *material: stainless steel (sus303) e32-d211 e32-d211r two, 0.5 dia. 2.5 5.5 11 1.8 2,000 *material: stainless steel ( sus304 ) 25 10 two fiber attachments (e39-f9) two hexagonal nuts two toothed washers sensing head: m3 0.5* optical fiber: two, 1 dia. e32-dc200e e32-d21r two, 1 dia. 3 dia. 2,000 135 heat-shrinkable tube optical fiber: two, 2.2 dia. *material: stainless steel ( sus304 ) 15 sensing head* e32-d12 e32-d12r 3 15 2,000 25 10 2.7 dia. sensing head: 3 dia.* optical fiber: two, 1 dia. two fiber attachments (e39-f9) *material: brass/nickel platin g two, 0.5 dia. e32-d22 e32-d22r optical fiber: two, 2.2 dia. sensing head* sensing surface: two, 1 dia. two, 2.2-dia. mounting holes with two, 4.4-dia. countersinks on both sides *material: aluminum 10 3 2.5 7.5 5 2,000 15 2.5 e32-d15x e32-d15xr note: mounting screws (countersunk screw m2 8 2 pcs) included optical fiber: two, 1 dia. sensing head* two fiber attachments (e39-f9) sensing surface: two, 0.5 dia. two, 2.2-dia. mounting holes with two, 4.4-dia. countersinks on both sides *material: aluminum 2.5 1.5 8 5 4.5 12 2 25 2,000 e32-d25x e32-d25xr note: mounting screws (countersunk screw m2 8 2 pcs) included two, 1 dia. 2.5 dia. max. two hexagonal nuts stainless-steel tube (sus304) two toothed washers sensing head: m6 0.75 (fine thread) *2 optical fiber: two, 2.2 dia. 2,000 17 2.4 5.2 10 90 (40)*1 *1. ( ): e32-dc200b4 *2. material: brass/nickel platin g e32-dc200b(b4) e32-dc200br(b4r) two, 0.5 dia. 2.5 5.5 11 90 (40)*1 1.8 2,000 25 10 two fiber attachments (e39-f9) two hexagonal nuts 1.2 dia. max. stainless- steel tube (sus304) two toothed washers sensing head: m3 0.5 *2 optical fiber: two, 1 dia. *1. ( ): e32-dc200f4 *2. material: stainless steel ( sus304 ) e32-dc200f(f4) e32-dc200fr(f4r) 5.7 6 dia. 1.5 45 12 sensing surface light baffle optical fiber: two, 2.2 dia. heat-shrinkable tube sensing head* 30 35 12 2,000 *material: stainless steel ( sus304 ) e32-d14l e32-d14lr 35 15 12 15 1 0.5 1.5 2,000 10 25 two fiber attachments (e39-f9) heat-shrinkable tube optical fiber: two, 1 dia. sensing head: 3 dia.* stainless-steel tube: 2 dia. 45 light baffle sensing surface *material: stainless steel (sus304) e32-d24 e32-d24r (unit: mm)
43 standard/flexible models break-resistant/coated models fiber units with reflective sensors optical fiber: two, 2.2 dia. two, 2.2-dia. mounting holes with two, 4.4-dia. countersinks on both sides sensing surface sensing head* *material: aluminum 7.5 5 2,000 15 2.5 2.8 3 2.4 2.5 10 e32-d15y e32-d15yr note: mounting screws (countersunk screw m2 8 2 pcs) included two fiber attachments (e39-f9) sensing surface sensing head* optical fiber: two, 1 dia. two, 2.2-dia. mounting holes with two, 4.4-dia. countersinks *material: aluminum 8 1.5 2.5 5 4.5 12 2,000 1.42.3 25 2 e32-d25y e32-d25yr note: mounting screws (countersunk screw m2 8 2 pcs) included optical fiber: two, 2.2 dia. two, 2.2-dia. mounting holes with two, 4.4-dia. countersinks on both sides sensing surface sensing head* *material: aluminum 7.5 5 4 2,000 15 1.4 2.2 2.5 10 3 e32-d15z e32-d15zr note: mounting screws (countersunk screw m2 8 2 pcs) included sensing head* two fiber attachments (e39-f9) sensing surface optical fiber: two, 1 dia. two, 2.2-dia. mounting holes with two, 4.4-dia. countersinks *material: aluminum 2,000 3 5 4.5 12 25 2 0.9 1.2 2.5 8 e32-d25z e32-d25zr note: mounting screws (countersunk screw m2 8 2 pcs) included 5.2 two, sixteen, 0.265 dia. sensing head: m6 0.75* two hexagonal nuts two toothed washers protective tube optical fiber: two, 2.2 dia. 10 17 2.4 15 2,000 *material: brass/nickel plating e32-d11 e32-d11u 3.2 two, four, 0.25 dia. two hexagonal nuts two toothed washers sensing head: m4 0.7* optical fiber: two, 1 dia. 2.4 3 15 2,000 7 10 25 two fiber attachments (e39-f9) material: stainless steel (sus303) e32-d21b 5.5 25 two fiber attachments (e39-f9) 10 2.5 four, 0.25 dia. two hexagonal nuts two toothed washers protective tube optical fiber: two, 1 dia. 15 1.8 11 2,000 sensing head: m3 0.5* *material: brass/nickel plating e32-d21 3 15 2,000 25 10 2.7 dia. sensing head: 3 dia.* optical fiber: two, 1 dia. two fiber attachments (e39-f9) *material: brass/nickel plating two, four, 0.25 dia. e32-d221b 15 1.5 dia. 100 2,000 15 25 10 four, 0.25 dia. sensing head *1 optical fiber: 1 dia. brancher (abs): 3 dia. attachmen t *1. material: stainless steel (sus304) note: the attachment is attached with adhesive and cannot be removed. e32-d22b optical fiber: two, 2.2 dia. two, 2.2-dia. mounting holes with two, 4.4-dia. countersinks on both sides sensing head* sensing surface: two, sixteen, 0.265 dia. *material: aluminum 10 3 2.5 7.5 5 2,000 15 2.5 e32-d15xb note: mounting screws (countersunk screw m2 8 2 pcs) included optical fiber: two, 1 dia. two, 2.2-dia. mounting holes with two, 4.4-dia. countersinks sensing head* two fiber attachments (e39-f9) sensing surface: two, four, 0.25 dia. *material: aluminum 2.5 1.5 8 5 4.5 12 2 25 2,000 e32-d25xb note: mounting screws (countersunk screw m2 8 2 pcs) included
44 long-distance/high-power models indicates models that allow free cutting. ultracompact/thin-sleeve models coaxial/small-spot models fiber units with reflective sensors two, 3.2-dia. mounting holes with 6-dia. countersinks optical axis optical axis two, 5.8-dia lenses 8.5 9 22 17.5 11 6.5 sensing head* optical fiber: two, 2.2 dia. 2,000 *material: aluminum e32-d16 5.2 3 2.4 20 2,000 two, 1.4 dia. 4 dia. two hexagonal nuts two toothed washers sensing head: m6 0.75* 10 *material: brass/nickel platin g optical fiber: two, 2.2 dia. e32-d11l 3.2 two, 0.9 dia. two hexagonal nuts two toothed washers sensing head: m4 0.7* optical fiber: two, 1 dia. 2.4 3 15 2,000 7 10 25 two fiber attachments (e39-f9) *material: brass/nickel platin g e32-d21l two, 0.9 dia. 3 15 2,000 25 10 2.7 dia. sensing head: 3 dia.* optical fiber: two, 1 dia. two fiber attachments (e39-f9) *material: brass/nickel plating e32-d22l 10 25 15 stainless-steel tube: 0.8 dia. two, 0.25 dia. sensing head: 3 dia.* heat- shrinkable tube optical fiber: two, 1 dia. 35 2,000 15 12 two fiber attachments (e39-f9) *material: stainless steel (sus303) e32-d33 15 15 100 2,000 15 25 10 two, 0.125 dia. stainless-steel tube: 0.5 dia. sensing head: 2 dia. *1 brancher: 3.5 dia. attachment *1. material: stainless steel (sus303) note: the attachment is attached with adhesive and cannot be removed. irraxtube: 1.2 dia. e32-d331 note: there is a white line on the fiber t hat is inserted in the emitter-side port. 5.2 emission fiber: 1 dia. 2.5 dia. two hexagonal nuts two toothed washers sensing head: m6 0.75* optical fiber: two 2.2 dia. sixteen, 0.25-dia. reception fibers 10 23 3 2.4 2,000 *material: brass/nickel plating e32-cc200 e32-cc200r emission fiber: 1 dia. sixteen, 0.265-dia. reception fibers sensing head: 3 dia.* brancher (heat-resistant, abs, black): 6 dia. optical fiber: two 2.2 dia. 15 400 15 1,570 2,000 *material: stainless steel ( sus304 ) note: there is a yellow dotted line on the fiber that is inserted in the emitter-side port. e32-d32l 10 25 two fiber attachments (e39-f9) 25 2,000 12 20 heat-shrinkable tube optical fiber: two, 1 dia. *material: stainless steel (sus303) 2.5 emission fiber: 0.5 dia. four, 0.25-dia. reception fibers two hexagonal nuts two toothed washers sensing head: m3 0.5* e32-c31 note 1. there is a white line on the cable fiber that is inserted in the emitter-side port. 2. the core diameter of the sensing head is assumed to lie in the range 2.44 to 2.49 mm. 10 25 two fiber attachments (e39-f9) 15 emission fiber: 0.5 dia. four, 0.25-dia. reception fibers 22 2,000 12 2 heat-shrinkable tube optical fiber: two, 1 dia. 3 dia. sensing head: 2 dia.* *material: stainless steel (sus303) note: there is a white line on the cable fiber that is inserted in the emitter-side port. e32-d32 17 1.8 22 1,000 15 irraxtube: 2.6 dia. brancher (abs resin): 3.5 dia. optical fiber: two, 1.2 dia. white markings: emission side (heat-shrinkable tube) fiber attachmen t two toothed washers sensing head: m3 0.5* 1 0.175 dia. (emission fiber) 6 0.175 dia. (reception fibers) two hexagonal nuts 10 25 (100) (5) *material: stainless steel (sus303) e32-c41 note: the fiber attachment is attached with ad- hesive and cannot be removed. *material: stainless steel (sus303) two fiber attachments 15 1 0.175 dia. (emission fiber) 6 0.175 dia. (reception fibers) 2 irraxtube: 2.6 dia. optical fiber: two, 1.2 dia. brancher (abs resin) 3.5 dia. white markings: emission side (heat-shrinkable tube) 3 dia. sensing head: 2 dia.* 1,000 15 10 25 (100) (5) 22 e32-c42 note: the fiber attachment is attached with ad- hesive and cannot be removed.
45 area-sensing models retroreflective fiber units convergent-reflective models fiber units with reflective sensors 15 10 5 5 25 two, 3.2-dia. mounting holes 2,000 10.85 2 sensing head* 32 0.265 dia. (emission and reception fibers in alternating arrangement ) optical fiber: two, 2.2 dia. *material: brass/nickel plating e32-d36p1 e32-r21 (an e39-r3 reflector is provided as an accessory.) 10 25 two fiber attachment s optical fiber: two, 1 dia. silicon tube two hexagonal nuts two washers sensing head* lens (pmma) m6 0.75 27.8 17.8 2.8 11 3 14 2,000 5 dia. 10 2.2 *material: abs 15.2 lens (pmma) 7.2 10 21.5 27 15 7 16 4 sensing head *1 optical fiber: two, 2.2 dia. standard length: 2 m two, m3 set screws (provided) *1. material: abs (6) 8 e32-r16 (an e39-r1 reflector is provided as an accessory.) 14 3.5 7 11 3.5 2 2 2.5 1 2.5 10 25 2,000 two, 3.2-dia. mounting holes with 6-dia. countersinks on both sides 3.6 dia. optical fiber: two, 1 dia. optical axis two fiber attachments (e39-f9) 2.2 dia. *material: abs sensing head* e32-l24s optical fiber: two, 2.2 dia. two, 3.2-dia. mounting holes with 6-dia. countersinks on both sides optical axis 4 11 22.5 17.5 4.5 3.8 9 0.75 1.7 2,000 12.3 sensing head* *material: abs e32-l16 10 25 two fiber attachments (e39-f9) 18 side-view prism (pc) two, 3.2-dia. lenses optical fiber: two, 1 dia. 2,000 4 6 3.3 3.6 4 3.3 1.5 optical axis sensing distance 20 6.5 sensing head* *material: polycarbonate two, 3.2-dia. mounting holes with 6-dia. countersinks on both sides e32-l24l e32-l25l 10 25 two fiber attachments (e39-f9) 18 sensing distance two, 3.2-dia. lenses optical fiber: two, 1 dia. 2,000 6 4 16 6.5 sensing head* two, 3.2-dia. mounting holes with 6-dia. countersinks on both sides *material: polycarbonat e optical fiber: two, 2.2 dia. 2,000 20 10 6.5 5 4.8 6.5 20 sensing head* two, 3.2-dia. holes with 6-dia. countersinks 4 sensing distance *material: heat-resistant abs e32-l25 note: there is a white line on the fiber that is inserted in the emitter-side port. e32-l25a 20 5 2,000 6.5 sensing distance 4.8 6.5 sensing head* optical fiber: two, 2.2 dia. 20 10 4 two, 3.2-dia. holes with 6-dia. countersinks *material: heat-resistant abs note: there is a white line on the fiber that is in- serted in the emitter- side port.
46 convergent-reflective models indicates models that allow free cutting. heat-resistant models chemical-resistant models fiber units with reflective sensors a two, 4 dia. optical axis sensing head (stainless steel) two, 3.2-dia. holes with 6-dia. countersinks on one side flexible tube: 2.8 dia.*1 5.5 b 25 33.5 27 19 7 11 13 *2 5 (max.) 2,000 4 dia. 8.9 18 *1 material: stainless steel e32-l86 note: the maximum allowable temperatures for sections a and b are 200 ? c and 110 ? c, respectively. the section insert- ed into the amplifier unit (indicated by *2), however, must stay within the am- plifier unit's operating temperature range. two, 1.5 dia. 3.1 4.9 two hexagonal nuts two toothed washers sensing head: m6 0.75* optical fiber: two, 2.2 dia. 2.4 133 17 2,000 10 *material: brass/nickel platin g e32-d51 note: the maximum allowable temperature is 150 ? c. the maximum allowable temperature for continuous operation is 130 ? c. b 5 dia. 2.2 dia. sleeve sus flexible tube 15 11.5 5 10 *2 4.5 5 8.5 sus303 fiber: 1.2 dia. sleeve m4 0.7 2.2 dia. sensing head: m6 0.75 *1 6.4 3 2 5 dia. 8 15 13 *2 20 5 6.5 16.5 b 5 (70) a 3 (4.2 dia.) 2,000 two toothed washers (sus) two hexagonal nuts (sus) *1. material: stainless steel (sus303) protective tube (gray) e32-d81r-s e32-d81r note 1. the maximum allowable tempera- tures for sections a and b are 200 ? c and 110 ? c, respectively. the section inserted into the amplifier unit (indi- cated by *2), however, must stay within the amplifier unit's operating temperature range. 2. confirm applicable amplifier units before placing an order. (refer to precautions for correct use .) using the e32-d81r-s using the e32-d81r 10 ab 20 5 *4 3 2,000 5 dia. 2.2 dia. sleeve 5 dia. *3 3.5 dia. sus flexible tube two hexagonal nuts two toothed washers sensing head: m6 0.75 *1 1.4 dia. m4 0.7 15 11.5 5 10 *2 4.5 5 8.5 3 2 2.4 *1. material: stainless steel (sus303) *3. the diameter is 6 if the fiber length exceeds 10 m. *4. the diameter is 10 if the fiber len g th exceeds 10 m. b sleeve 5 dia. hexagonal caulking sus316l 16.5 6.5 5 *2 13 8 6.4 15 e32-d61-s e32-d61 note 1. the maximum allowable tempera- tures for sections a and b are 350 ? c and 110 ? c, respectively. the section inserted into the amplifier unit (indi- cated by *2), however, must stay within the amplifier unit's operating temperature range. 2. confirm applicable amplifier units before placing an order. (refer to precautions for correct use .) using the e32-d61-s using the e32-d61 5 7 60 20 10 2,000 16.5 *2 13 5 ab c 2.4 5 6.5 6.4 1 5 8 sleeve 5 dia. 4 dia. 2.8 dia. hexagonal caulking sus316l sus flexible tube two toothed washers two hexagonal nuts sensing head: m4 0.7 *1 2.5 dia. 1.65 dia. stainless-steel tube: 1.25 dia. 1 dia. *1. material: stainless steel (sus303) c 5 dia. 2.2 dia. sleeve 15 11.5 5 10 *2 4.5 5 8.5 e32-d73-s e32-d73 note 1. the maximum allowable tempera- tures for sections a, b, and c are 400 ? c, 300? c, and 110 ? c, respec- tively. the section inserted into the amplifier unit (indicated by *2), how- ever, must stay within the amplifier unit's operating temperature range. 2. confirm applicable amplifier units before placing an order. (refer to precautions for correct use .) using the e32-d73-s using the e32-d73 2,000 16 100 sensing head: 6 dia. fluororesin 5 dia. optical fiber: two, 2.2 dia. e32-d12f 100 2,000 4.5 (26) fluororesin tube (protective cover) optical-axis mark optical axis sensing head: 7 dia. optical fiber: 2.2 dia. e32-d14f
47 dimensions label-detection models liquid-level detection models application-corresponding fiber units 1.6 4 23.5 9.4 1.6 9.2 24 r3.5 lens (pmma) 10 optical axis 20 sensing head* 25.2 36.3 2,000 r1.6 r1.6 3.2 9 7.6 8.4 8 optical fiber: two, 2.2 dia. *material: abs e32-g14 sensing head thirty-two, 0.265 dia.* optical fiber: two, 2.2 dia. reception side: sixteen, 0.265 dia. emission side: sixteen, 0.265 dia. 2,000 15 13.25 4.4 eight, r0.5 r10 5 2 4 5 11.4 23.45 5 20.4 e32-d36t 10 6 sensing head (pc) mounting hole 15.2 (13) 1.2 2.8 64 16 18 2,000 25 two fiber attachments (e39-f9) optical fiber: two, 1 dia. two, 3.2-dia. lenses (pc) e32-l25t sensing surface (2 11) optical axis sensing head* emitter receiver tube holder 20 27 4.2 19.9 5,000 optical fiber: 2.2 dia. *material: abs for the sensing head, pmma for the prism, and pbt for the pipe holder. e32-a01 sensing surface (2 11) sensing head* tube holder 27 4.5 5 21 3 7 12 14.5 3.3 4.5 1.7 *material: abs for the sensing head, pmma for the prism, and pbt for the pipe holder. 5,000 optical axis optical fiber: 2.2 dia. e32-a02 2,000 7.2 sensing head (fluororesin): 6 dia. fiber connector (brass/nickel plating): 9 dia. 8 dia. optical fiber: two, 2.2 dia. *2 to the amplifier unit length of unbendable section: 150 (350) *1 2,000 27 42 *1. ( ): e32-d82f2 *2. the 2-m section of optical fiber on the amplifier-unit side is plastic and therefore allows free cutting. ab 1,500 mm from the tip e32-d82f1 e32-d82f2 note: the maximum allowable temperatures for sections a and b are 200 c and 85 c, respectively. (unit: mm)
48 models for glass-substrate alignment/mapping indicates models that allow free cutting. wafer-mapping models application-corresponding fiber units 6.510.7 3.8 24.5 1.1 2,000 optical axis two, 3.2-dia. mounting holes with four, 6-dia. countersinks emission fiber: 2.2 dia. reception fiber: 2.2 dia. 1214 5 e32-a08 e32-a07e1(e2) * the e32-a07e1(e2) has a reception fiber and an emission fiber. use the fiber with a model display tube (fiber with blue dotted line) as light emitting side. 36 two, 2.8-dia. flexible tubes ( stainless steel ) 4 dia. 5.5 2.2 dia. two, 3.2-dia. mounting holes with 6-dia. countersinks 18 sensing head *1 *1. material: stainless steel (sus303) 1 7 11 21.7 a b 5 13 *2 25 2,000 e32-l66 note: the maximum allowable temperatures for sections a and b are 300 c and 110 c, respectively. the section inserted into the am- plifier unit (indicated by *2), ho wever, must stay within the ampli- fier unit's operating temperature range. sensing head* *material: aluminum 2,000 optical fiber: two, 2.2 dia. 12 9 7 23 lens: 5.8 dia. optical axis two, 3.2-dia. mounting holes with 6-dia. countersinks 20 8.9 e32-a09 e32-a09h b 712 30 a 5 2,000 28 13 9 sensing head *1 2.8-dia. flexible tubes* two, 3.24-dia. mounting holes with four, 6-dia. countersinks lens: 5.8 dia. optical axis 5 dia. 4 dia. 2.2 dia. 248.9 *1. material: stainless steel *2 e32-a09h2 note: the maximum allowable temperatures for sections a and b are 300 c and 110 c, respectively. the section inserted into the amplifier unit (indicated by *2), however, must stay within the amplifier unit's operating temperature range. e39-l83 mounting bracket (sus) 2 sensing surface 2 dia. 25 20.5 2,000 10 fiber attachment (e39-f9) sensing head *1 stamp (1-mm dia.) *material: brass/nickel plating 3 dia. 0.4 1.8 3.2 10 11 17.6 3.2 two, r1.6 r1.6 3.4 4.3 e32-a03 note: use the stamped surface and its opposing surface as installation (refer- ence) surfaces. 13 12.5 3 18.5 6.5 3 2,000 24.5 10 25 two, 3.4 dia. stamp (1-mm dia.) optical fiber: 1 dia. fiber attachment (e39-f9) 2 dia. sensing surface sensing head * 3 dia. 4.5 10 3.5 *material: brass/nickel plating e32-a03-1 note 1. use the stamped surface and its opposing surface as installation (ref- erence) surfaces. 2. set of two symmetrical parts. 2 2 2 4 20.5 2,000 25 10 four, r1.35 stamp (1-mm dia.) 2 dia. 2 dia. fiber attachment (e39-f9) sensing head * optical fiber: 1 dia. 1.2 dia. stamp (1-mm dia.) *material: stainless steel (sus303) sensing surface e32-a04 note: use the stamped surface and its opposing surface as installation (refer- ence) surfaces. 1.2 dia. 3.5 2,000 17 21 1.2 2 4 10 2 25 10 sensing head * two, m2 installation (reference) surface sensin g surface 2.5 2 dia. 9 2 optical axis fiber attachment (e39-f9) optical fiber: 1 dia. *material: stainless steel (sus303) e32-a04-1 note: set of two symmetrical parts.
49 lens units accessories lens units e39-f1 material: brass for the body and optical glass for the lens itself. note: two per set. 4 dia. 8.9 m2.6 0.45 effective depth: 3.8 spot-facing depth: 0.9 side-view units e39-f2 material: brass for the body and optical glass for the lens itself. note: two per set. 4 dia. 2.8 dia. 9.2 5.7 m2.6 effective depth: 3.2 spot-facing depth: 0.9 3 18 8.5 3.6 12 8 0.2 6.5 6.4 m3 6 angle-setting screw 6.4 two, 3.2 dia. m3 internally toothed washer two, 4 dia. two, m3 3 slotted-head set screws* 20.7 reflection unit with lens e39-f3 material: brass for the body and aluminum for the base. *secure the fiber head with the slotted-head set screws. do not insert a lens (e39-f1). lens unit for reflective fiber units e39-f3a note: this is the lens unit for the e32-d32 and e32- c42. material: aluminum for body and optical glass for lens. 23 13 3 m2 2 allen-head set screw (for securing the fiber) 2.1 dia. 6 dia. 4 dia. lens surface (lens diameter: 3.7 mm) lens unit for reflective fiber units e39-f3a-5 material: aluminum for body and optical glass for lens note: this is the lens unit for the e32-c31 and e32-c41. 6.5 16.5 lens surface ( lens diameter: 3.7 mm ) straight knurling 5 dia. 4 dia. 2.1 dia. m3 0.5 effective screw length: 3 lens unit for reflective fiber units e39-f3b material: aluminum for body and optical glass for lens. note: this is the lens unit for the e32-c31 and e32-c41. 25.2 lens surface (lens diameter: 4.8 mm) m3 0.5 depth: 4.4 24.1 5.5 dia. 6 dia. lens unit for reflective fiber units e39-f3c material: aluminum for body and optical glass for lens. note: this is the lens unit for the e32-c31 and e32-c41. straight knurling lens surface (lens diameter: 3.7 mm) m3 0.5 effective screw length: 3 10.9 5.8 4.3 dia. 5 dia.
50 protective spiral tubes other accessories accessories e39-f32a/f32a5 e39-f32b/f32b5 6 dia. 12 l 12 3 dia. end cap *1 tube *2 *1. material: brass/nickel plating *2. material: stainless steel (sus304) (4.6 dia.) head connector *1 m3 0.5; depth: 4 note 1. the length l is 1,000 for the e39-f32a/-f32b and 500 for the e39-f32a5/-f32b5. 2. the e39-f32b(5) consists of two e39-f32a(5)s. e39-f32c/f32c5 12 7 dia. l 12 end cap *1 4 dia. (5.6 dia.) head connector *1 m4 0.7; depth: 4 tube *2 *1. material: brass/nickel plating *2. material: stainless steel ( sus304 ) note: the length l is 1,000 for the e39-f32c and 500 for the e39-f32c5. e39-f32d/f32d5 12 8.5 dia. l 12 5 dia. end cap *1 (7 dia.) head connector *1 m6 0.75; depth: 4 tube *2 *1. material: brass/nickel plating *2. material: stainless steel (sus304) note: the length l is 1,000 for the e39-f32d and 500 for the e39-f32d5. fiber cutter e39-f4 84 5 standard-fiber insertion hole thin-fiber insertion hole 24.5 thin-fiber attachments e39-f9 1.1 dia. mark indicating position of insertion into amplifier unit 3.6 dia. 25 10 11.7 (2.2 dia.) material: abs note: two per set. *provided with thin-fiber models. fiber connector e39-f10 3.8 dia. 3 dia. 26 12.8 fiber: 2.2 dia. fiber: 2.2 dia. splice *1 retention clip *2 retention clip *2 *1. material: polyester *2. material: brass 2 32.6 (48.6) 8 four, 0.8 29.6 20.422.4 3.2 7.6 9.2 four, r0.8 note: dimension a varies with the model number as shown in the following table. dimension a model four, 6 dia. e39-f13 e39-f14 2.4 1.2 e39-f15 2.4/1.2 four, a (see note.) 27.4 33.8 fiber connector e39-f13 e39-f14 e39-f15 sleeve bender e39-f11 10.8 27 42.5 10 10 r5 r7.5 r12.5 r10
51 safety precautions refer to warranty and limitations of liability . this product is not designed or rated for ensuring safety of persons either directly or indirectly. do not use it for such purposes. do not use the product in atmospheres or environments that exceed product ratings. fiber units mounting tightening force the tightening force applied to the fiber unit should be as fol- lows: chemical-resistive models the following method is recommended to prevent the fluororesin case from cracking when the sensor is being secured. be especially careful not to crack the case when using screws to secure the sensor. fiber cutting procedure cut a thin fiber as follows: connection do not pull or press the fiber units. the fiber units have a withstand force of 9.8 n or 29.4 n maximum. do not bend the fiber unit beyond the permissible bending radius given under ordering information . do not bend the edge of the fiber units (excluding the e32-t @ r and e32-d @ r). do not apply excess force on the fiber units. the fiber head could be broken by excessive vibration. to prevent this, the following is effective: warning precautions for correct use screw-mounting model cylindrical model fiber units clamping torque m6 screw/ 6-mm dia. cylinder 0.98 nm max. m3/m4 screw 0.78 nm max. 2-mm dia./3-mm dia. cylinder 0.29 nm max. 1.5-mm dia./1-mm dia. cylinder 0.2 nm max. e32-l25a 0.78 nm max. e32-m21 up to 5 mm to the tip: 0.49 nm max. more than 5 mm from the tip: 0.78 nm max. e32-t16 0.49 nm max. e32-r21 0.39 nm max. e32-t16w(r) e32-t16p(r) e32-t16j(r) e32-l24s e32-l24l e32-t25l 0.29 nm max. toothed washers spring mounting clip nuts ( attachment ) use a proper-sized wrench. retaining screw (flat head or sunken head) (m3 max.) fiber sensing head (1) an attachment is temporarily fitted to a thin fiber before shipment. (2) secure the attach- ment after adjusting the position of it in the direction indicat- ed by the arrow. (3) insert the fiber to be cut into the e39-f4. (4) finished state (proper cutting state) thin fiber attachment (e39-f9) temporarily fitted cutter (e39-f4) two holes for thin fiber three holes for standard fiber (2.2-mm dia.) approx. 0.5 mm insertion direction note: insert the fiber in the direction indicated by the arrow. amplifier unit fiber unit 20 mm min. 20 mm min. correct incorrect fiber unit nylon wireholder correct incorrect ta p e a one-turn loop can absorb vibrations.
52 e39-f11 sleeve bender the bending radius of the stainless steel tube should be as large as possible. the smalle r the bending radius becomes, the shorter the sensing distance will be. insert the tip of the stain- less steel tube to the sleeve bender and bend the stainless steel tube slowly along the curve of the sleeve bender. heat-resistant fiber units (e32-d51 and e32-t51) the fibers of these units cannot be extended using the e39- f10 fiber connector. the maximum allowable temperature for continuous opera- tion with these units is 130 c. it is 150 c for short-term use. e32-t14 and e32-g14 these units may enter the light-on state if there are reflecting objects at the ends of the lenses. in this case, attach the black stickers provided to the ends of the lenses. wafer sensors (e32-l25(a)) to ensure correct performance, insert the fiber with a white line into the emitter-side por t of the amplifier unit. e32-t16 and e32-t16p to use the slit provided, peel off the backing sheet, align it with the edg- es of the sensing surface, and at- tach it to the sensing head. use the slit in applications where saturation occurs (i.e., changes in light inten- sity cannot be obtained) due to short sensing distances. e32-m21 separate the 4 fibers by distances sufficient to prevent inter- ference. vacuum-resistant fiber units (e32-v) although flanges, fiber units on the vacuum side, and lens units have been cleaned, as an extra precaution, clean these products with alcohol before use in high-vacuum environ- ments to ensure that they are properly degreased. liquid-level detection sensors (e32-d82f) secure the fiber unit using the unbendable section. other- wise, the liquid-level detection position may be displaced. for applications in hazardous environments, install the fi- ber unit in the hazardous envir onment but install the ampli- fier unit in a safe environment. liquid-level detection sensors: tube-mounting models ensure that the tube is not deformed when using a band to secure the fiber unit. drops of water, bubbles, or haze inside the tube may cause malfunctions. e32-a07e1(e2) there is a difference in sensing object angle between e32-a07e1 and e32-a07e2. select a model in accordance with the bending direction of a sensing object. use the fiber with a model display tube as light emitting side. adjustment e32-g14 the sensing distance is short, making the incident light inten- sity large. this makes it impossible to teach without a work- piece. perform teaching with and without a workpiece. liquid-level (e32-d82f) detection position the liquid-level detection po- sition is at a distance of 5.2 2 mm from the end of the fluororesin section. (refer to the diagram on the right.) the liquid-level detection po- sition varies with the surface tension of the liquid and the deg ree of wetness at the fiber unit's detection position. other considerations liquid level (e32-d82f) operation may become unstable in the following cases: a bubbles stick to the cone of the sensing head. b solute is deposited on the cone of the sensing head. c the liquid has a high viscosity. there are some liquids, such as milky white liquids, for which detection is not possible. do not let the end of the fluororesin section bump into an- other object. damage to, or deformation of, the sensing head may result in unstable operation. heat-resistant fiber units (e32-d81r, e32-d61, and e32- d73) the pitch of the emission-side and reception-side fiber-inser- tion ports varies with the amplifier unit. be sure to use an ap- propriate fiber unit. chemical-resistant fiber and liquid level (e32-d82f) fluororesin has high chemical resist ance. however, applications in the atmosphere of vaporized chemic als (gases) or steam may cause malfunction or damage inside sensor s. run a full check before using in such environments. 1.2 mm dia. max. r12.5 mm r7.5 mm 1.3 mm dia. min. r10 mm fiber tip position mark stainless steel tube r5 mm 90 max. 10 mm 10 mm do not bend here. stickers slit provided e32-t16's sensing head example amplifier unit fiber unit e3x-da @ -s e3x-mda @ e32-d @ -s e3x-da @ -n e3x-na @ e32-d @ view from the cable drawing side sensing object emission emission reception reception e32-a07e2 e32-a07e1 liquid-level detection position 5.2 2 mm (from the end of the fluororesin section)
53 accessories use of e39-r3 reflector 1. use detergent, etc., to remove any dust or oil from the surfaces where tape is applied. adhesive tape will not be attached properly if oil or dust remains on the surface. 2. the e39-r3 cannot be used in places where it is exposed to oil or chemicals. e39-f32 @ protective spiral tubes 1. insert a fiber to the protective spiral tube from the head connector side (screwed) of the tube. 2. push the fiber into the protective spiral tube. the tube should be straight so that the fiber is not twisted when inserted. then turn the end cap of the spiral tube. 3. secure the protective spiral tube on a suitable place with the attached nut. 4. use the attached saddle to secure the end cap of the protective spiral tube. to secure the protective spiral tube at a position other than the end cap, apply tape to the tube so that the portion becomes thicker in diameter. e39-f10 fiber connector mount the fiber connector as shown in the following illustrations. the fiber units should be as close as possible when they are connected. sensing distance will be reduced by approximately 25% when fibers are connected. only 2.2-mm dia. fibers can be connected. protective spiral tube fiber unit protective spiral tube fiber unit protective spiral tube toothed washer fiber unit hexagon clamping nut mounting panel end cap tube saddle retention unit fiber unit splice retention unit fiber unit fiber unit fiber unit
r ead and u nderstand this document please read and understand this document before using the products. please consult your omron representative if you have any qu estions or comments. warranty omron?s exclusive warranty is that the products are free from def ects in materials and workmanship for a period of one year (or other period if specified) from date of sale by omron. omron makes no warranty or representation, express or implied, regarding non-infringement, merchantability, or fitness for particular purpose of the products. any buyer or user acknowledges that the buyer or user alone has determ ined that the products will suitabl y meet the requirements of their intended use. omron disclaims all other warranties, express or implied. limitations of liability omron shall not be responsible for special, indire ct, or consequential damages, loss of profits or commercial loss in any way connected with the produc ts, whether such claim is based on contract, warranty, negligence, or strict liability. in no event shall responsibility of omron for any act exceed the indivi dual price of the product on wh ich liability is asserted . in no event shall omron be responsible for warranty, repair, or other claims regarding the products unless omron?s analysis confirms that the pr oducts were properly handled, stored, installed, and maintained and not subject to contamination, abuse, misuse, or inappropriate modification or repair. suitability for use the products contained in this document are not safet y rated. they are not designed or rated for ensuring safety of persons, and should not be relied upon as a safety component or pr otective device for such purposes. please refer to separate cata logs for omron's safety rated products. omron shall not be responsible for conformi ty with any standards, codes, or regulations that apply to the combination of produc ts in the customer?s application or use of the product. at the customer?s request, omron will prov ide applicable third party certification documents identifying ratings and limitation s of use that apply to the products. this information by itself is not sufficient for a complete determination of the suitability of the products i n combination with the end product, machine, system, or other application or use. the following are some examples of applicati ons for which particular attention must be given. this is not intended to be an exh austive list of all possible uses of the products, nor is it intended to im ply that the uses listed may be suitable for the products: ? outdoor use, uses involving potential chem ical contamination or electr ical interference, or conditi ons or uses not described i n this document. ? nuclear energy control systems, combustion systems, railroad systems, aviation systems, medical equipment, amusement machines, vehicles, safety equipment, and installations subject to separate industry or government regulations. ? systems, machines, and equipment that c ould present a risk to life or property. please know and observe all prohibitions of use applicable to the products. never use the products for an application involving seri ous risk to life or property without ensuring that the system as a whole has been designed to address the risks, and that the omron product is properly rated and installed for the intended use wi thin the overall equipment or system. performance data performance data given in this document is provided as a guide for the user in determining suit ability and does not constitute a warranty. it may represent the result of omron?s test conditions, and the users mu st correlate it to actual application requirements. actual per formance is subject to the omron warranty and limitations of liability. change in specifications product specifications and accessories may be changed at any time based on improvements and other reasons. it is our practice to change model numbers when published ratings or features are ch anged, or when significant construction cha nges are made. however, some specifications of the product may be changed withou t any notice. when in doubt, special model numbers may be assi gned to fix or establish key specifications for your application on your request. please consult wi th your omron representative at any time to confirm actual specifications of purchased products. dimensions and weights dimensions and weights are nominal and are not to be used for manufacturing purposes, even when tolerances are shown. errors and omissions the information in this document has been carefully checked and is believed to be accurate; however, no responsibility is assum ed for clerical, typographical, or proofreadi ng errors, or omissions. programmable products omron shall not be responsible for t he user?s programming of a programm able product, or any consequence thereof. copyright and copy permission this document shall not be copied for sales or promotions without permission. this document is protected by copyright and is intended solely for use in conjunction with the product. please notify us before copying or reproducing this document in any manner, for any other purpose. if copying or transmitting this document to another, please cop y or transmit it in its entirety.
a host of remarkable functions inside a compact body. a complete lineup of sensor heads to handle an even wider range of applications. this is the platform for omron?s sensing technology. high-resolution sensing using laser and magnetic technology. linear platform smart monitor a common platform for fiber sensors and sensors with separate amplifiers. on/off platform mobile console laser-type smart sensors zx-l series inductive displacement smart sensors zx-e series a lineup of smart sensors that use the eddy current method. an improved lineup for smarter sensing. refinement and a new generation that goes beyond superior performance. photoelectric sensors with separate digital amplifiers have joined the smart sensor family. digital fiber sensors e3x-da-s series/mda series laser-type photoelectric sensors with separate digital amplifiers e3c-lda series authorized distributor: note: specifications subject to change without notice. this document provides information mainly for selecting suitable models. please read the instruction sheet carefully for information that the user must understand and accept before purchase, including information on warranty, limitations of liability, and precautions. note: do not use this document to operate the unit.
2007. 1 2 omron corporation industrial automation company http://www.ia.omron.com/ (c)copyright omron corporation 2007 all rights reserved. in the interest of product improvement, specifications are subject to change without notice.

▲Up To Search▲

Price & Availability of ECL10US05

	To Download ECL10US05 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .